Hitachi NV 65AF3 instruction manual Nailer Operation, Methods of Operation, Lock lever

Page 13

Nail Knob guide

(5) Close the magazine cover first and swing the nail guide closed.

(6) Lock the knob correctly.

NOTE:

Be careful not to deform the collated wires and not to disengage the nails with the guide surface.

Otherwise, the nail guide will not close correctly.

Magazine cover

NAILER OPERATION

Read section titled "SAFETY" (pages 4 - 6).

DANGER

Always wear eye protector with side shields which conforms to ANSI Z87.1 specifications.

WARNING

Never point Nailer toward yourself or anyone else.

Never carry with finger on trigger.

Remove finger from trigger when not driving nails.

Never place your hands or feet closer than 8 inches (200 mm) from firing head when using.

Do not drive nails on top of other nails or with Nailer at too steep of an angle; nails can ricochet and hurt someone.

In order to avoid double fire or unwanted ejection of a nail due to bouncing of the Nailer.

1)do not push Nailer on workpiece with strong force;

2)take Nailer away from workpiece using recoil;

3)release trigger quickly when performing trigger fire.

Do not drive nails into thin boards or near corners and edges of workpiece. Nails can be driven through or away from workpiece and hit someone.

Never drive nails from both sides of a wall at the same time. Nails can be driven into and through the wall and hit a person on the opposite side.

Never use Nailer which is defective or operating abnormally.

Do not use Nailer as hammer.

Disconnect air hose from Nailer when:

1)it is not in use;

2)leaving work area;

3)moving it to another location;

4)handing it to another person; and

5)using the hook.

METHODS OF OPERATION

Lock lever

Lock Position

ロック

Lock Lever

Turn the lock lever to the free position.

フリー

Free Position

– 13 –

Image 13
Contents NV 65AF3 Contents Important Information Definitions of Signal WordsDo not Exceed 120 psi SafetySafety Stay Alert EMPLOYER’S ResponsibilitiesName of Parts OperationAccessories SpecificationsNail Selection MIN MAXBefore Operation ApplicationsWorking Environment AIR SupplyCold Weather Care LubricationTrigger Lock Air hoseAdjusting AIR Pressure Testing the NailerLoading Nails Plastic sheet collated nails Wire collated nailsMethods of Operation Nailer OperationLock lever Nose cap DrivingChanging the exhaust direction Adjusting the nailing depthCutting off the sheet Disconnect AIR Hose from NailerRead section titled Safety page 4 Maintenance and InspectionClearing a jam Inspect the feedersService and Repairs Operator troubleshooting Maintenance chartAction WHY HOW Problem Check Method Correction60 872-971 Retaining Ring for D3 Shaft 204

NV 65AF3 specifications

The Hitachi NV 65AF3 is a powerful, versatile tool designed for professionals in construction and woodworking, particularly in the framing and installation of materials. This pneumatic nailer is noteworthy for its combination of advanced technology and user-friendly features that enhance efficiency and productivity on the job site.

One of the stand-out features of the NV 65AF3 is its lightweight design. Weighing in at just under 4.4 pounds, the nailer allows for ease of handling over extended periods, reducing fatigue for users. This portability is complemented by its compact size, making it suitable for tight spaces where larger tools may prove cumbersome.

The NV 65AF3 utilizes a pneumatic power source, which means it requires an air compressor to operate. This not only provides a consistent power output but also allows the nailer to deliver impressive performance in terms of driving power. The tool is capable of driving nails ranging from 1-1/4 inches to 2-1/2 inches in length, making it suitable for applications such as framing, sheathing, and roofing.

Another key feature is its adjustable depth of drive. This functionality allows users to finely tune how deep the nails are driven into the material, ensuring precision and consistency in finishing work. The tool also includes a selective actuation switch that enables users to choose between sequential and contact firing modes. The sequential mode offers greater control, making it ideal for delicate tasks, while the contact mode allows for faster nailing in production environments.

A robust magazine holds up to 100 nails, enabling longer run times between reloads. The NV 65AF3’s rear exhaust directs air away from the user and work surface, keeping the workspace clean and safe.

Durability is another hallmark of the Hitachi NV 65AF3, with its rugged construction designed to withstand the rigors of job sites. The tool also features a rubber grip handle designed for comfort and stability during use.

In conclusion, the Hitachi NV 65AF3 is an exemplary pneumatic nailer, merging portability, power, and precision. Its user-centric design and durable build make it a reliable choice for contractors seeking a high-performance tool for a wide range of applications. Whether framing, roofing, or installing wood, the NV 65AF3 delivers the reliability and efficiency professionals demand.