Hitachi NV 65AF3 instruction manual Important Information, Definitions of Signal Words

Page 3

IMPORTANT INFORMATION

READ AND UNDERSTAND ALL OF THE OPERATING INSTRUCTIONS, SAFETY PRECAUTIONS AND WARNINGS IN THIS MANUAL BEFORE OPERATING OR MAINTAINING THIS NAILER.

Most accidents that result from the operation and maintenance of Nailers are caused by the failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs, and by observing appropriate safety procedures.

Basic safety precautions are outlined in the “SAFETY” section of this Manual and in the sections which contain the operation and maintenance instructions.

Hazards that must be avoided to prevent bodily injury or machine damage are identified by DANGERS and WARNINGS on the Nailer and in this Manual.

Never use this Nailer for applications other than those specified in this Manual.

DEFINITIONS OF SIGNAL WORDS

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury,

or may cause machine damage. NOTE emphasizes essential information.

– 3 –

Page 2 Page 4
Image 3
Page 2 Page 4
Contents NV 65AF3 Contents Important Information Definitions of Signal WordsDo not Exceed 120 psi SafetySafety Stay Alert EMPLOYER’S ResponsibilitiesName of Parts OperationMIN MAX SpecificationsAccessories Nail SelectionAIR Supply ApplicationsBefore Operation Working EnvironmentAir hose LubricationCold Weather Care Trigger LockTesting the Nailer Adjusting AIR PressureLoading Nails Plastic sheet collated nails Wire collated nailsNailer Operation Methods of OperationLock lever Nose cap DrivingDisconnect AIR Hose from Nailer Adjusting the nailing depthChanging the exhaust direction Cutting off the sheetInspect the feeders Maintenance and InspectionRead section titled Safety page 4 Clearing a jamService and Repairs Problem Check Method Correction Maintenance chartOperator troubleshooting Action WHY HOW60 872-971 Retaining Ring for D3 Shaft 204

NV 65AF3 specifications

The Hitachi NV 65AF3 is a powerful, versatile tool designed for professionals in construction and woodworking, particularly in the framing and installation of materials. This pneumatic nailer is noteworthy for its combination of advanced technology and user-friendly features that enhance efficiency and productivity on the job site.

One of the stand-out features of the NV 65AF3 is its lightweight design. Weighing in at just under 4.4 pounds, the nailer allows for ease of handling over extended periods, reducing fatigue for users. This portability is complemented by its compact size, making it suitable for tight spaces where larger tools may prove cumbersome.

The NV 65AF3 utilizes a pneumatic power source, which means it requires an air compressor to operate. This not only provides a consistent power output but also allows the nailer to deliver impressive performance in terms of driving power. The tool is capable of driving nails ranging from 1-1/4 inches to 2-1/2 inches in length, making it suitable for applications such as framing, sheathing, and roofing.

Another key feature is its adjustable depth of drive. This functionality allows users to finely tune how deep the nails are driven into the material, ensuring precision and consistency in finishing work. The tool also includes a selective actuation switch that enables users to choose between sequential and contact firing modes. The sequential mode offers greater control, making it ideal for delicate tasks, while the contact mode allows for faster nailing in production environments.

A robust magazine holds up to 100 nails, enabling longer run times between reloads. The NV 65AF3’s rear exhaust directs air away from the user and work surface, keeping the workspace clean and safe.

Durability is another hallmark of the Hitachi NV 65AF3, with its rugged construction designed to withstand the rigors of job sites. The tool also features a rubber grip handle designed for comfort and stability during use.

In conclusion, the Hitachi NV 65AF3 is an exemplary pneumatic nailer, merging portability, power, and precision. Its user-centric design and durable build make it a reliable choice for contractors seeking a high-performance tool for a wide range of applications. Whether framing, roofing, or installing wood, the NV 65AF3 delivers the reliability and efficiency professionals demand.
Top Page Image Contents