Makita AF501 specifications That dust, sand, chips and foreign matter will not

Page 7

On rooftops and other high locations, nail as you move forward. It is easy to lose your footing if you nail while inching backward. When nailing against perpendicular surface, nail from the top to the bottom. You can perform nailing operations with less fatigue by doing so.

A nail will be bent or the tool can become jammed if you mistakenly nail on top of another nail or strike a knot in the wood. The nail may be thrown and hit someone, or the tool itself can react dangerously. Place the nails with care.

c

I

Do not leave the loaded tool or the air compressor

under pressure for a long time out in the sun. Be sure

that dust, sand, chips and foreign matter will not

 

enter the tool in the place where you leave it setting.

*D o not point the ejection port at anyone in the vicinity. Keep hands and feet away from the ejection port area.

7

Image 7
Contents Model AF501 Safety Instructions Page AIR ELock knob Lock pin Live wire Page That dust, sand, chips and foreign matter will not Page Lubricate moving parts to prevent rusting Ing the job. Keep the tool in tip-top conditionParts Slide door Adjusting depth of nailing Storage cavity Hose Jammed nailer Connecting air hoseOperation Air exhaustHook NailsMakita Corporation