There may be local regulations concerning noise which must be complied with by keeping noise levels within prescribed limits. In certain cases, shutters should be used to contain noise.
Shutter
Do not tamper with the tool or attempt to use it for other than nailing.
Operate the tool within the specified air pressure of
4.0- 7.0 kgf/cmZG(60 - 100 PSIG) for safety and longer tool life. Do not exceed the recommended max. operating pressure of 7 kgf/cm2G (100PSIG). The tool should not be connected to a source whose pressure potentially exceeds 14.0 kgf/cmzG (200 PSIG).
...
..>
*
.I. 1 ..
. .
Never use the tool with other than compressed air. If
< | .... = | I |
COMPRESSED | .... |
|
.... | g;:::.. | |
AIR | .....;,, | |
.... |
| |
|
|
4