Makita AN901 instruction manual Maintenance of nailer

Page 16

MAINTENANCE

CAUTION:

Always disconnect the hose before attempting to perform inspection or maintenance.

Maintenance of nailer

Always check the tool for its overall condition and loose screws before operation. Tighten as re- quired.

With tool disconnected, make daily inspection to assure free movement of the contact element and trigger. Do not use tool if the contact element or trigger sticks or binds.

Make sure that the trigger is locked when the change lever is set to the LOCK position.

Trigger lock

16

Image 16
Contents Construction Coil Nailer Safety Instructions Page Kgf/cm2G AIR Triggerlock Page Page ?&1 Page Selecting air hose Selecting compressorLubrication Nose adapter Loading nailerConnecting air hose Adjusting depth of nailingOperation Jammed nailer Air exhaustHook Nails Maintenance Maintenance of nailerMaintenance of compressor, air set and air hose Page Memo Makita Limited ONE Year Warranty