Makita AN901 instruction manual Maintenance of compressor, air set and air hose

Page 17

When the tool is not to be used for an extended period of time, lubricate the tool using pneumatic tool oil and store the tool in a safe place. Avoid exposure to direct sunlight and/or a humid or hot environment.

Maintenance of compressor, air set and air hose

After operation, always drain the compressor tank and the air filter. If moisture is allowed to enter the tool, it may result in poor performance and possible tool failure.

-,

Air filter

Check regularly to see if there is sufficient pneu- matic oil in the oiler of the air set. Failure to main-

tain sufficient lubrication will cause O-rings toOiler wear quickly.

\

Pneumatic oil -A

17

Image 17
Contents Construction Coil Nailer Safety Instructions Page Kgf/cm2G AIR Triggerlock Page Page ?&1 Page Lubrication Selecting compressorSelecting air hose Loading nailer Nose adapterOperation Adjusting depth of nailingConnecting air hose Hook Air exhaustJammed nailer Nails Maintenance of nailer MaintenanceMaintenance of compressor, air set and air hose Page Memo Makita Limited ONE Year Warranty