Do not leave the loadedtool or the air compressor under pressure for a long time out in the sun. Be sure that dust, sand, chips and foreign matter will not enter the tool in the place where you leave it setting.
@Donot point the ejection port at anyone in the vicinity. Keep hands and feet away from the ejection port area.
@Whenthe air hose is connected, do not carry the tool with your finger on the trigger or hand it to someone in this condition. Accidental firing can be extremely dangerous.
Handle the tool carefully as there is high pressure inside the tool that can be dangerous if a crack is caused by rough handling (dropping or strik- ing). Do not attempt to carve or engrave on the tool.
8