Only those involved in the work should be in the vicinity. Children especially must be kept away at all times.
There may be local regulations concerning noise which must be complied with by keeping noise levels within prescribed limits. In certain cases, shutters should be used to contain noise.
Do not play with the contact element: it prevents I accidental discharge, so it must be kept on and
not removed. Securing the trigger in the ON po- sition is also very dangerous. Never attempt to fasten the trigger.
Do not operate a tool if any portion of the tool operating controls is inoperable, disconnected, altered, or not working properly.
I
Operate the tool within the specified air pressure of 4.5 - 8.5 kgf/cm*G(65 - 120 PSIG) for safety and longer tool life. Do not exceed the recom- mended max. operating pressure of 8.5 kgf/cmzG (120 PSIG). The tool should not be connectedto a source whose pressure potentially exceeds 14.0 kgf/cmzG(200 PSIG).
8 5 kgf/cm2G | 8 5 kgf/cm2G |
(120 PSIG) | (120 PSIG) |
4