Elektra Beckum Essential Instructions for TF 100: Tool Height and Fence Adjustments

13.3 Spindle Speed Setting/Changing

Remove the plastic cover to have access.

Loosen the ratchet lever and place belt on the desired step of the pulleys. Available speeds are:

top	=	4000 min-1
centre	=	6000 min-1
lower	=	7500 min-1

Tighten the belt and replace the plas- tic guard.

13.4 Tool Height Setting

If the tool is only partially used and	Spindle vertical adjustment is	After a spindle height adjustment lock
needs to be lowered below the table,	achieved by turning the handwheel	in position by engaging the spindle
remove the table rings before moun-	inside the main frame. Turn	lock lever.
ting it on the spindle.	- clockwise to raise
	- counter-clockwise to lower

Caution!

Switch machine off and let tool come to a complete stop before making any adjustments.

13.5 Fence And Fence Plate Setting

A A B B

Caution!

Switch machine off and let tool come to a complete stop before making any adjustments.

Loosen both starknobs (A) to move the fence forward or backwards.

Loosen the starknobs (B) to reposi- tion the fence plates.