Woodstock W1831 owner manual Bench Mounting, Example of a direct mount

Page 15

Model W1831 (For Machines Mfg. Since 2/12)

Bench Mounting

The base of this machine has mounting holes that allow it to be fastened to a workbench or other mounting surface to prevent it from moving during operation and causing accidental injury or damage.

The strongest mounting option is a "Through Mount" (see Figure 5) where holes are drilled all the way through the workbench—and hex bolts, washers, and hex nuts are used to secure the machine in place.

Another option is a "Direct Mount" (see Figure 6) where the machine is secured directly to the workbench with lag screws and washers.

Bolt

Flat Washer

Machine Base

Workbench

Flat Washer

Lock Washer

Hex Nut

Figure 5. Example of a through mount.

Lag Screw

Flat Washer

Machine Base

SETUP

Workbench

Figure 6. Example of a direct mount.

-13-

Image 15

Contents Shop FOX Oscillating Spindle Sander OWNERS MANUALPage Contents Woodstock Technical Support IntroductionModel W1831 Construction Materials Machine identification Controls and FeaturesSafety For.Your.Own.SafetyStandard.Machinery.Safety.Instructions STABLE.MACHINE..Unexpected movement during Additional Safety for Sanders Circuit Requirements ElectricalExtension Cords Polarized PlugSetup UnpackingInventory Setup Machine Placement Cleaning MachineExample of a direct mount Bench MountingDust Collection AssemblyTo test run the machine Test RunDisabling Switch OperationsGeneral Sanding Sanding Drum/Sleeve InstallationSander Accessories AccessoriesMaintenance CleaningSchedule Changing Motor Brushes ServiceTools Required Problem Possible Cause Troubleshooting120 VAC Wiring DiagramMain Breakdown PartsDescription Main Parts ListDescription Label PlacementModel W1831 For Machines Mfg. Since 2/12 Woodstock international inc. p.o. box Bellingham, Wa Warranty High Quality Machines and Tools