Woodstock W1724, W1723 instruction manual Models

Page 1

MODELS

W1723 and W1724

15" PLANERS

INSTRUCTION MANUAL

Phone: 1-360-734-3482 • On-Line Technical Support: tech-support@shopfox.biz

COPYRIGHT © NOVEMBER, 2003 BY WOODSTOCK INTERNATIONAL, INC.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

Printed in China

Image 1

Contents Models Page Contents Introduction Woodstock Service and SupportAbout Your New Planer Specifications Warranty and ReturnsDisconnect machine when cleaning, adjusting or servicing Safety FirstSafety Additional Safety Instructions for Planers 220V Operation ElectricalExtension Cords GroundingBox Contents AssemblyOverview Shop Preparation Cleaning PlanerHandwheel Stand W1723To mount the handwheel and crank, do these steps To mount the extension rollers, do these steps Extension RollersTo assemble the knife setting jig, do these steps Knife Setting Jig W1723Spiral Knife Alignment Tool W1724 Planer Overview AdjustmentsTo check the cutterhead-to-table alignment, do these steps Cutterhead AlignmentUnderside of planer table Adjustments Inspecting Knives W1723 Knife Replacement procedureTypical Shop FOX cutterhead Knife Replacement W1723Gib bolt tightening sequence Spiral knife system Knife Replacement W1724Twisting knife and aligning gib Feed Rollers Chip Breaker Chip breaker height adjustment Chip Deflector To adjust the chip deflector, do these stepsAnti-Kickback Pawls Roller Spring Tension To adjust the roller spring tension, do these stepsTable Bed Rollers To adjust the table bed roller height, do these stepsOperations Always Wear Safety Goggles When Operating This machineTest Run Feed RateOperational Tips Only plane a clean workpieceSolutions Troubleshooting Planing ResultsMaintenance General CleaningGear box drain and fill plugs LubricationBelt Tension To adjust the belts, do these stepsSymptom Possible Cause Corrective Action Troubleshooting Machine OperationPlaner Accessories Maintenance Maintenance Description Maintenance Long T Allen Wrench 4MM Maintenance Angle 191⁄2 Long W1723 and W1724 15 Planer Wiring Diagram Warranty Card BOX BELLINGHAM, WA