Delta D25235 029-2 Installation, Location of the Air Compressor, Anchoring of the Air Compressor

Page 10

INSTALLATION

HOW TO SET UP YOUR UNIT

1. Place the air compressor on on a

Location of the Air Compressor

solid, level surface.

•Locate the air compressor in a clean, dry, and well ventilated area.

•Locate the air compressor at least 12" away from the wall or other obstructions that will inter- fere with the flow of air.

•Locate the air compressor as close to the main power supply as possible to avoid using long lengths of electrical wiring. NOTE: Long lengths of electrical wiring could cause power loss to the motor.

•The air filter must be kept clear of obstructions which could reduce air flow to the air com- pressor.

Anchoring of the Air

Compressor

Excessive Vibration can weaken the air

tank and cause an explosion. The compressor must be properly mounted.

The air compressor MUST be bolted to a solid, level surface.

Hardware needed:

4 - Concrete anchors (not sup- plied)

4 - 3/8" Lag screw to fit con- crete anchors (not supplied)

4 - 5/8" Washer (not supplied) - Shims (if needed)

2.Mark the surface using the holes in the air compressor feet as a template.

3.Drill holes in the surface for the concrete anchors. Install con- crete anchors.

4.Line-up holes in surface with holes in air compressor feet.

5.Place the (4) washers (not sup- plied) between the floor and air compressor feet. If needed, solid shims may be placed between the washers and floor to evenly distribute weight on all four feet. See next figure.

 

3/8" Lag

 

Screw

 

(not supplied)

5/8" Washer

 

(not supplied)

 

Shim Under

Surface Line

Concrete Anchor

Washer

(not supplied)

(not supplied)

6.Place the (4) 3/8" lag screws through the air compressor feet, washers, shims, and into the anchors.

7.Torque 3/8" lag screws to 7-10 ft.-lbs.

D25235

10-ENG

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Structioin N M Anual Safety Guidelines Definitions Hazard Attachments & Accessories Hazard What can Happen HOW to Prevent IT Fire, Inhalation, Damage to Vehicle Surfaces Glossary SpecificationsAccessories Duty CycleUnpacking AssemblyTools Required for Assembly To Add Oil To PumpLocation of the Air Compressor InstallationAnchoring of the Air Compressor Wiring Instructions Air Distribution SystemTypical Compressed AIR Distribution System Operation Know Your Air Compressor Description of OperationBefore Starting Break-in Procedure How to Use Your UnitHow to Stop How to Start Before Each Start-UpTo Check Safety Valve MaintenanceCustomer Responsibilities Checking To Drain TankOil ChangingBelt Replacement Air Filter Inspection and ReplacementAdjusting Belt Tension Inspect Air Lines and Fittings for Leaks Motor Pulley/Flywheel AlignmentAir Compressor Pump Intake and Exhaust Valves Air compressor Head Bolts TorquingService and Adjustments To Replace or Clean Check ValveStorage Additional ServiceMotor Troubleshooting Problem Cause CorrectionPressure reading Minal box area 25-ENG D25235 AIR Compressor Diagram Parts List KEY Part Number DescriptionPump Diagram Not Shown Limited Warranty

D25235 029-2, DLKC6580V2 specifications

Delta DLKC6580V2 and D25235 029-2 represent significant advancements in the realm of industrial automation and control systems. These products harness cutting-edge technology to enhance operational efficiency, reliability, and flexibility across various applications.

The Delta DLKC6580V2 is a highly versatile motion control system designed for precision and performance. It boasts a robust architecture that supports a wide range of servo motors, making it ideal for applications requiring fine-tuned movements. One of the standout features of the DLKC6580V2 is its advanced control algorithms, which enable smooth and accurate motion, minimizing vibrations and ensuring high-quality outputs. Additionally, its real-time processing capabilities allow for rapid response and adjustments during operation, which is crucial in high-speed manufacturing environments.

Another key feature of the DLKC6580V2 is its integrated communication options. It supports multiple industrial protocols, including EtherCAT and CANopen, allowing seamless integration with various controllers and devices within an industrial setup. This flexibility enhances the overall system configuration and reduces downtime during installation and maintenance.

On the other hand, the D25235 029-2 is an innovative industrial power supply unit known for its reliability and efficiency. The D25235 series is designed to provide stable power under varying load conditions, making it an essential component for uninterrupted operations in critical applications. Its high efficiency minimizes energy consumption, contributing to lower operational costs and a reduced carbon footprint.

The D25235 029-2 features advanced protection mechanisms that safeguard against surges, overloads, and short circuits, ensuring long-term durability and reliability. The compact design of the unit also facilitates easy integration into existing systems, providing users with considerable versatility in installation.

Both the DLKC6580V2 and D25235 029-2 excel in delivering user-friendly interfaces, simplifying operation and configuration. With intuitive software tools, operators can quickly set up, monitor, and adjust settings, enhancing overall productivity.

In conclusion, Delta’s DLKC6580V2 and D25235 029-2 represent the pinnacle of innovation in industrial control and power supply systems. Their advanced features, exceptional performance, and robust technologies make them indispensable tools for modern manufacturing processes, offering businesses the ability to achieve higher efficiency and reliability in their operations.
Top Page Image Contents