Delta DLKC6580V2, D25235 029-2 instruction manual To Drain Tank, Oil, Checking, Changing

Page 17

To Drain Tank

NOTE: Operation of the air compres- sor will cause condensation to build up in the air tank. Always drain tank on a washable surface or in a suit- able container to prevent damaging or staining surfaces.

1.Set the On/Auto/Off lever to "OFF".

2.Close the globe valve.

3.Remove the air tool or accessory.

4.Open the globe valve and allow the air to slowly bleed from the air tank until tank pressure is approximately 20 psi.

5.Close the globe valve.

6.Drain water from air tank by opening drain valve (counter- clockwise) on bottom of tank.

Water will con- dense in the air

tank. If not drained, water will cor- rode and weaken the air tank causing a risk of air tank rupture.

7.After the water has been drained, close the drain valve (clockwise). The air compressor can now be stored.

NOTE: If drain valve is plugged, release all air pressure. The valve can then be removed, cleaned, then reinstalled.

Oil

NOTE: Use a air compressor oil such as SAE-30 (API CG/CD heavy duty motor oil). Under extreme winter con- ditions use SAE-20 weight oil. NOTE: Crankcase oil capacity is approxi- mately 60 fluid ounces (1.8 L).

Checking

1.The oil level should be to the mid- dle of the sight glass (C).

2.If needed remove oil fill plug (A) and slowly add oil until it reaches the middle of the sight glass.

A

C

Changing

1.Remove the oil fill plug (A).

2.Remove the oil drain plug (B) and drain oil into a suitable container.

C

B

3.Replace the oil drain plug (B) and tighten securely

4.Sowly add compressor oil until the oil level is in the middle of the sightglass (C). NOTE: When fill- ing the crankcase, the oil flows very slowly into the pump. If the oil is added too quickly, it will overflow and appear to be full.

Overfilling with oil will cause prema-

ture compressor failure. Do not overfill.

5.Replace oil fill plug (A) and tight- en securely.

17-ENG

D25235

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Structioin N M Anual Safety Guidelines Definitions Hazard Attachments & Accessories Hazard What can Happen HOW to Prevent IT Fire, Inhalation, Damage to Vehicle Surfaces Accessories SpecificationsGlossary Duty CycleTools Required for Assembly AssemblyUnpacking To Add Oil To PumpAnchoring of the Air Compressor InstallationLocation of the Air Compressor Air Distribution System Wiring InstructionsTypical Compressed AIR Distribution System Know Your Air Compressor Description of Operation OperationHow to Stop How to Use Your UnitBefore Starting Break-in Procedure Before Each Start-Up How to StartCustomer Responsibilities MaintenanceTo Check Safety Valve Oil To Drain TankChecking ChangingAdjusting Belt Tension Air Filter Inspection and ReplacementBelt Replacement Air Compressor Pump Intake and Exhaust Valves Motor Pulley/Flywheel AlignmentInspect Air Lines and Fittings for Leaks Air compressor Head Bolts TorquingTo Replace or Clean Check Valve Service and AdjustmentsMotor Additional ServiceStorage Problem Cause Correction TroubleshootingPressure reading Minal box area 25-ENG D25235 AIR Compressor Diagram KEY Part Number Description Parts ListPump Diagram Not Shown Limited Warranty

D25235 029-2, DLKC6580V2 specifications

Delta DLKC6580V2 and D25235 029-2 represent significant advancements in the realm of industrial automation and control systems. These products harness cutting-edge technology to enhance operational efficiency, reliability, and flexibility across various applications.

The Delta DLKC6580V2 is a highly versatile motion control system designed for precision and performance. It boasts a robust architecture that supports a wide range of servo motors, making it ideal for applications requiring fine-tuned movements. One of the standout features of the DLKC6580V2 is its advanced control algorithms, which enable smooth and accurate motion, minimizing vibrations and ensuring high-quality outputs. Additionally, its real-time processing capabilities allow for rapid response and adjustments during operation, which is crucial in high-speed manufacturing environments.

Another key feature of the DLKC6580V2 is its integrated communication options. It supports multiple industrial protocols, including EtherCAT and CANopen, allowing seamless integration with various controllers and devices within an industrial setup. This flexibility enhances the overall system configuration and reduces downtime during installation and maintenance.

On the other hand, the D25235 029-2 is an innovative industrial power supply unit known for its reliability and efficiency. The D25235 series is designed to provide stable power under varying load conditions, making it an essential component for uninterrupted operations in critical applications. Its high efficiency minimizes energy consumption, contributing to lower operational costs and a reduced carbon footprint.

The D25235 029-2 features advanced protection mechanisms that safeguard against surges, overloads, and short circuits, ensuring long-term durability and reliability. The compact design of the unit also facilitates easy integration into existing systems, providing users with considerable versatility in installation.

Both the DLKC6580V2 and D25235 029-2 excel in delivering user-friendly interfaces, simplifying operation and configuration. With intuitive software tools, operators can quickly set up, monitor, and adjust settings, enhancing overall productivity.

In conclusion, Delta’s DLKC6580V2 and D25235 029-2 represent the pinnacle of innovation in industrial control and power supply systems. Their advanced features, exceptional performance, and robust technologies make them indispensable tools for modern manufacturing processes, offering businesses the ability to achieve higher efficiency and reliability in their operations.
Top Page Image Contents