Emerson Process Management T-SERIES Return Policy, New and unused equipment, Used equipment

Page 18

Return Policy

Return Policy

Micro Motion procedures must be followed when returning equipment. These procedures ensure legal compliance with government transportation agencies and help provide a safe working environment for Micro Motion employees. Failure to follow Micro Motion procedures will result in your equipment being refused delivery.

Information on return procedures and forms is available on our web support system at www.micromotion.com, or by phoning the Micro Motion Customer Service department (see page 1).

New and unused equipment

Only equipment that has not been removed from the original shipping package will be considered new and unused. New and unused equipment requires a completed Return Materials Authorization form.

Used equipment

All equipment that is not classified as new and unused is considered used. This equipment must be completely decontaminated and cleaned before being returned.

Used equipment must be accompanied by a completed Return Materials Authorization form and a Decontamination Statement for all process fluids that have been in contact with the equipment. If a Decontamination Statement cannot be completed (e.g., for food-grade process fluids), you must include a statement certifying decontamination and documenting all foreign substances that have come in contact with the equipment.

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Micro Motion Series Sensor Page Specifications Customer serviceTroubleshooting Before You BeginDefinitions European installationsInstallation options Purge plugsSeries sensor with core processor Full flow tubes Hazardous area installationsDetermining a Location Environmental limitsSeries sensor ambient and process temperature limits UL and CSA ambient temperature limitsPipe run Maximum wiring distancesMaximum cable lengths ValvesOrienting the Sensor Self-draining applicationsHygienic applications Eccentric reducer Flow direction arrowMounting the Sensor Mounting a T-Series sensorWiring Core processor to a 4-wire remote transmitterWrapping the shield drain wires Applying the heat shrink Connecting the wires at the core processor Purge Fittings Case purging procedureGrounding Removing a purge plugTime required to purge T-Series sensor cases Purge rate Time Sensor modelReturn Policy New and unused equipmentUsed equipment Page 20002172
Top Page Image Contents