Emerson 381 instruction manual Example

MODEL 381 pH/ORP	SECTION 1.0
	DESCRIPTION AND SPECIFICATIONS

1.3ORDERING INFORMATION Model pH/ORP Sensor is housed in a PES body suitable for insertion, submer- sion or flow through installation. The sensor includes an integral preamplifier, measuring electrode, double junc- tion gel-filled reference cell, automatic temperature compensation for pH, and a choice of two cable lengths of either 15 ft. or 50 ft. (4.5 or 15.2 m).

MODEL 381 INSERTION, SUBMERSION, FLOW THROUGH SENSOR

CODE	FUNCTION
pH	Requires Code 30
ORP	Requires Code 32	(not for use with 1054/1054A ORP Series)
pHE	Requires Code 31	(for use with 1054/1054A/2054 Series and 2081)

CODE INSTALLATION

02Submersion

03Flow Through

04Flow Through with Flow Powered Cleaner (not available with ORP)

CODE MEASURING ELECTRODE

10General purpose pH

11High pH Electrode, requires Code 21. For sodium concentrations greater than 1% or continuous measurement above 11 pH.

12Ruggedized pH Electrode. For abrasive solutions.

13Platinum ORP Electrode.

14Gold ORP Electrode.

15HF pH Electrode. For HF concentrations less than 100 ppm.

CODE LIQUID JUNCTION

20Wood/KYNAR Liquid Junction

21Ceramic/KYNAR Liquid Junction

CODE TEMPERATURE COMPENSATION

30Automatic T.C., 3.0K ohm. For Models 1003, 1050 & 1181 pH

31Automatic T.C., PT-100. For Models 1054/2054 Series, and 2081

32Automatic T.C., NOT REQUIRED (For Models 1023, 1060 and 1181 ORP)

CODE CABLE

40 15 ft. cable for integral sensor preamp

41 15 ft. coax cable w/BNC connector for remote sensor preamp and integral analyzer preamp (1054A-54/2054-54 only)

42 15 ft. coax cable w/o BNC connector for integral analyzer preamp (1054, 1181-43/44 & 2081-05 only)

43 50 ft. cable for integral sensor preamp

							CODE	INTEGRAL PREAMPLIFIER
							50	Preamp for Models 1181 pH/ORP & 1050/1060
							51	Preamp for Models 1003/1023
							52	Preamp NOT REQUIRED
							54	Preamp for Models 1054/2054 Series, and 2081
381	pH	00	10	20	30	40	51	EXAMPLE
								3