RIDGID MS1290LZ1 manual Know Your Compound Miter SAW, 12 IN. Blade, AMP Motor, Bevel Lock Lever

Page 11

FEATURES

KNOW YOUR COMPOUND MITER SAW

See Figure 1.

The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

12 IN. BLADE

A 12 in. blade is included with your compound miter saw. It will cut materials up to 13-1/2 in. wide, depending upon the angle at which the cut is being made.

15 AMP MOTOR

This saw has a powerful 15 amp motor with sufficient power to handle tough cutting jobs. It is made with all ball bearings, and has externally accessible brushes for ease of servicing.

BEVEL LOCK LEVER

The bevel lock lever securely locks your compound miter saw at desired bevel angles. Pulling the lever forward will release the saw allowing the blade to be tilted either left or right for bevel cuts. Pushing the lever back will lock the saw in place.

BEVEL STOP PIN

The bevel stop pin has two positions:

ELECTRIC BRAKE

An electric brake quickly stops blade rotation after the switch trigger is released.

EXACTLINE™ LASER GUIDE

For more accurate cuts, an Exactline™ laser guide is included with your miter saw. When used properly, the laser guide makes accurate, precision cutting simple and easy.

CARRYING

LOCK

HANDLE

PIN

DEPTH GUIDE

FRONT

1.Override (pin pulled completely out)

2.The 0° - 48° position for crown molding (pin pushed in)

CARRYING HANDLES

See Figure 2.

Carrying handles are located on the top of the saw arm and on the front of the saw base.

To transport: turn off and unplug the saw; lower saw arm and lock it in the down position; lock bevel and miter lock levers; lock slide lock knob.

DEPTH CONTROL KNOB

When loosened, the depth control knob allows the user to adjust the depth guide then holds the guide securely in place when the knob is retightened.

NOTE: It is not necessary to loosen the knob when locking or unlocking the saw arm.

DEPTH GUIDE

See Figure 2.

The depth guide is used for locking the saw arm in the down position or as a guide for limiting downward movement of the saw arm.

CARRYING

HANDLE

SAW ARM LOCKED IN DOWN POSITION

SWITCH

TRIGGER

SPINDLE

LOCK BUTTON

Fig. 2

NOTE: Controlling depth of cut is necessary when rough cutting a dado.

Fig. 3

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OPERATOR’S Manual Introduction Table of Contents Blade Coasts After Being Turned OFF General Safety RulesRead ALL Instructions  Before Making a CUT, be Sure ALL ADJUST- Ments are Secure Specific Safety RulesSpecific Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning ServiceElectrical Connection Cord Length Wire Size A.W.GElectrical Double InsulationGlossary of Terms Product Specifications FeaturesBevel Lock Lever Know Your Compound Miter SAW12 IN. Blade AMP MotorMiter Thumbwheel Switch TriggerMiter Lock Lever Miter ScalePhillips Screwdriver Framing Square Tools NeededRatchet Combination SquareFlat Head Socket CAP Screw Loose PartsDust BAG Mounting Holes AssemblyUnpacking Depth Guide Using the Depth GuideLocking / Unlocking the SAW ARM SAW ARMWork Clamp Installing the Dust BAGInstalling the Work Clamp Dust BAG Frame Guide Exhaust PortWasher HEX Boltinner Blade Washer with Installing / Replacing the BladeBlade Outer Blade Washer LoosenBroken RED Line Mounting the Exactline Laser GuideAligning the Laser Guide Line LaserCentering the SAW Blade Between the Slide Bars Removing / Replacing the Zero CLEAR- Ance Throat PlateSee Figures 20 Adjusting the Miter Lock LeverSquaring the SAW Blade to the Fence See Figures 18View of Blade Square with Fence Miter Scale Indicator FigSee Figures 25 Adjusting the Bevel Lock LeverAdjusting the Bevel Pivot Travel Pivot AdjustmentSliding Miter Fence IndicatorSquaring the Blade to the Miter Table See Figures 28Cutting with Your Sliding Compound Miter SAW OperationApplications Slide CUT Slide SAW ARM Forward then Push Down Back To Slide CUTSee Figures 32 Work Clamp Cross CUT Miter CUT To Miter CUT / Cross CUTSee Figures 34 Bevel CUT Clamp Lock PIN Scale Indicator BevelTo Bevel CUT See Figures 36Compound Miter CUT To Compound Miter CUTLong Workpiece Supporting Long WorkpiecesClamping Wide Workpieces See Figures 40Depth Guide CUT These Grooves With SAW Using AN Auxiliary FenceRough Cutting a Dado See Figures 43Pitch Side COMPOUND-ANGLE Settings for Popular StructuresCutting Compound Miters Inside Corner Fence Cutting Crown MoldingLaying Molding Flat on the Miter Table CeilingCrown Molding JIG Using a Crown Molding Support JIGMaking a Crown Molding Support JIG Lubrication MaintenanceGeneral Maintenance Cutting Warped MaterialBrush CAP Belt Cover Brush ReplacementAdjusting Socket Head Screw Motor Belt TensionKEY Changing the BatteriesDo not attempt to activate the laser Laser Guide Screws Aperture Cover KEYMiter Saw Utility Vehicle AccessoriesHOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyModel No MS1290LZ1 Serial No Customer Service Information

MS1290LZ1 specifications

The RIDGID MS1290LZ1 is a powerful miter saw designed for both professional tradespeople and avid DIYers, providing exceptional versatility, precision, and ease of use. With its robust features and innovative technologies, this miter saw stands out in the crowded market of power tools.

One of the standout features of the MS1290LZ1 is its powerful 15-amp motor, which generates an impressive 4,000 RPM. This high-speed operation allows for quick and clean cuts through various materials, including hardwood, softwood, and composites. Capable of making both bevel and miter cuts, the saw offers a cutting capacity of up to 12 inches, making it suitable for a range of applications, from framing to crown molding.

The MS1290LZ1 is equipped with a dual bevel system, allowing users to make beveled cuts to the left and right with ease. This means that operators can achieve precise angles without the need to flip or reposition their workpieces, significantly enhancing efficiency. The saw features a generous cutting capacity of 0 to 50 degrees for miter cuts on both sides, enabling a wide variety of projects with intricate angles.

Another notable characteristic of this miter saw is its advanced laser guide system. This technology projects an accurate line of cut directly onto the material, ensuring maximum precision. The adjustable laser can be aligned with the blade for improved accuracy, reducing the likelihood of errors. Additionally, the MS1290LZ1 includes a built-in work light that illuminates the cutting area, providing visibility in low-light environments.

The saw's ergonomic design enhances user comfort during operation. Equipped with a sturdy and lightweight chassis, the MS1290LZ1 is easy to transport, making it an excellent choice for on-site jobs. The handle features a comfortable grip, allowing for extended use without causing fatigue. Moreover, the saw includes a dust collection port that helps maintain a clean workspace by minimizing sawdust and debris.

In conclusion, the RIDGID MS1290LZ1 miter saw combines power, precision, and user-friendly features, making it an ideal tool for both novice and experienced users. With its powerful motor, dual bevel capabilities, advanced laser guide, and ergonomic design, this miter saw offers the versatility and performance needed to tackle any cutting task with confidence. Whether you're framing a house, crafting custom furniture, or working on detailed trim, the MS1290LZ1 is equipped to handle the job efficiently and accurately.
Top Page Image Contents