RIDGID R3202 manual Attaching Blade, Removing Blade, See Figures 2, Lock

Page 11

ASSEMBLY

ATTACHING BLADE

See Figures 2 - 3.

Unplug the saw.

Depress and hold spindle lock.

Remove blade screw by turning it counterclockwise with the 6 mm blade wrench, while keeping the spindle lock button depressed.

Remove outer blade washer (“D” washer).

WARNING:

If inner flange bushing has been removed, replace it before placing blade on spindle. Failure to do so will prevent blade from tightening properly and could result in serious personal injury.

Retract the lower guard into the upper guard, making sure the lower guard spring works properly, allowing the guard to move freely.

Check to see that the saw teeth and arrow on the saw blade and the arrow on the lower guard are pointing in the same direction.

NOTE: The saw teeth point upward at the front of the saw as shown.

Fit the saw blade inside the lower blade guard and onto the spindle.

Replace “D” washer.

Depress spindle lock and replace blade screw.

Tighten blade screw securely by turning it clockwise with the 6 mm blade wrench.

NOTE: Never use a blade that is too thick to allow the “D” washer to engage with the flats on the spindle.

REMOVING BLADE

See Figure 2 - 3.

Unplug the saw.

Depress and hold spindle lock.

Remove blade screw by turning it counterclockwise with the provided 6 mm blade wrench, while keeping the spindle lock depressed.

Remove outer blade washer (“D” washer).

Lift lower blade guard.

Remove blade.

SPINDLE

LOCK

INNER

FLANGE

BUSHING BLADE

SPINDLE

OUTER BLADE WASHER

BLADE SCREW

 

(“D” WASHER)

Fig. 2

 

 

SPINDLE

 

LOCK

 

 

6 mm BLADE

TO

TO

WRENCH

 

LOOSEN

 

TIGHTEN

Fig. 3

 

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Double Insulated OPERATOR’S ManualIntroduction Table of ContentsPersonal Safety General Power Tool Safety Warnings and InstructionsWork Area Safety Electrical SafetyCauses and Operator Prevention of Kickback Circular SAW Safety Warnings and InstructionsAdditional Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning ServiceElectrical Connection Cord Length Wire Size A.W.GElectrical Double InsulationProduct Specifications FeaturesAssembly See Attaching BladeRemoving Blade See Figures 2See Figures 4 OperationApplications KickbackBlade Guard System SAW BladesIndexable Levers Adjusting Blade DepthSTARTING/STOPPING the SAW See Figures 12 Operating the SAWSee Figures 17 RIP CUTtingBevel Cutting See Figures 15Bevel Cutting Pocket CuttingSee Figures 21 AdjustmentsPositive 0 Bevel Stop Power Supply cord Replacement MaintenanceAccessories General MaintenancePage HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyModel No R3202 Serial No Customer Service Information

R3202 specifications

The RIDGID R3202 is a sophisticated tool designed for professionals and DIY enthusiasts alike, primarily known for its versatility and robust performance in various tasks. This oscillating multi-tool excels in a wide range of applications, making it a valuable addition to any toolkit.

One of the key features of the R3202 is its powerful 3-amp motor, which delivers a variable speed range of 11,000 to 20,000 oscillations per minute. This allows users to adjust the speed according to the material being worked on, whether it's wood, metal, drywall, or other surfaces. The quick-release blade change system enhances productivity by enabling fast and effortless swaps between different attachments, ensuring you can switch tasks without delay.

The tool incorporates a 3.0-degree oscillation angle, providing efficient cutting and sanding operations while minimizing strain on the user. Additionally, the R3202 comes equipped with a rubber overmold grip for comfort and control, allowing users to work for longer periods without fatigue. This thoughtful design feature enhances grip, ensuring that the tool remains securely in hand during operation.

Another highlight of the RIDGID R3202 is its compatibility with various accessories. It utilizes the RIDGID Universal Fit System, which means that it can accommodate a wide selection of blades and sanding pads from multiple brands, giving users the flexibility to choose the best accessories for their specific projects. This ensures that whether you are performing precise cuts or detailed sanding, the tool is versatile enough to handle the job.

The multiple oscillating tool also features a removable dust extraction port, allowing users to maintain a cleaner workspace while minimizing dust inhalation during use. This is particularly essential for maintaining a safe and efficient working environment.

In addition to these features, the RIDGID R3202 is built with durability in mind. The tough construction materials ensure that it can withstand the rigors of job site use, providing reliable performance over time. This tool also comes with the RIDGID Lifetime Service Agreement, offering peace of mind through free parts and service for life, making it an excellent investment for both professionals and hobbyists.

Overall, the RIDGID R3202 is a powerful, flexible, and reliable oscillating multi-tool that stands out in the crowded market of power tools. Its combination of features, durability, and user comfort makes it an essential tool for a variety of cutting and sanding applications.
Top Page Image Contents