RIDGID R3202 manual Double Insulation, Electrical Connection, Extension Cords

Page 8

ELECTRICAL

DOUBLE INSULATION

Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded.

WARNING:

The double insulated system is intended to protect the user from shock resulting from a break in the product’s internal wiring. Observe all normal safety precautions to avoid electrical shock.

NOTE: Servicing of a tool with double insulation requires extreme care and knowledge of the system and should be performed only by a qualified service technician. For service, we suggest you return the tool to your nearest authorized service center for repair. Always use original factory replacement parts when servicing.

ELECTRICAL CONNECTION

This tool has a precision-built electric motor. It should be connected to a power supply that is 120 volts, AC only (normal household current), 60 Hz. Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If your tool does not operate when plugged into an outlet, double- check the power supply.

EXTENSION CORDS

When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter’s Laboratories (UL) should be used.

When working outdoors with a tool, use an extension cord that is designed for outside use. This type of cord is designated with “W-A” or “W” on the cord’s jacket.

Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation.

**Ampere rating (on tool data plate)

0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0

Cord Length

 

Wire Size (A.W.G.)

 

 

 

 

 

 

 

 

 

25'

16

16

16

16

14

14

 

 

 

 

 

 

 

50'

16

16

16

14

14

12

 

 

 

 

 

 

 

100'

16

16

14

12

10

—

**Used on 12 gauge - 20 amp circuit. NOTE: AWG = American Wire Gauge

WARNING:

Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools or other obstructions while you are working with a power tool. Failure to do so can result in serious personal injury.

WARNING:

Check extension cords before each use. If damaged replace immediately. Never use tool with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents OPERATOR’S Manual Double InsulatedTable of Contents IntroductionGeneral Power Tool Safety Warnings and Instructions Work Area SafetyElectrical Safety Personal SafetyCircular SAW Safety Warnings and Instructions Causes and Operator Prevention of KickbackAdditional Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningCord Length Wire Size A.W.G ElectricalDouble Insulation Electrical ConnectionFeatures Product SpecificationsAssembly Attaching Blade Removing BladeSee Figures 2 SeeOperation ApplicationsKickback See Figures 4SAW Blades Blade Guard SystemIndexable Levers Adjusting Blade DepthSTARTING/STOPPING the SAW Operating the SAW See Figures 12RIP CUTting Bevel CuttingSee Figures 15 See Figures 17Pocket Cutting Bevel CuttingSee Figures 21 AdjustmentsPositive 0 Bevel Stop Maintenance AccessoriesGeneral Maintenance Power Supply cord ReplacementPage Warranty DAY Satisfaction Guarantee PolicyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredCustomer Service Information Model No R3202 Serial No

R3202 specifications

The RIDGID R3202 is a sophisticated tool designed for professionals and DIY enthusiasts alike, primarily known for its versatility and robust performance in various tasks. This oscillating multi-tool excels in a wide range of applications, making it a valuable addition to any toolkit.

One of the key features of the R3202 is its powerful 3-amp motor, which delivers a variable speed range of 11,000 to 20,000 oscillations per minute. This allows users to adjust the speed according to the material being worked on, whether it's wood, metal, drywall, or other surfaces. The quick-release blade change system enhances productivity by enabling fast and effortless swaps between different attachments, ensuring you can switch tasks without delay.

The tool incorporates a 3.0-degree oscillation angle, providing efficient cutting and sanding operations while minimizing strain on the user. Additionally, the R3202 comes equipped with a rubber overmold grip for comfort and control, allowing users to work for longer periods without fatigue. This thoughtful design feature enhances grip, ensuring that the tool remains securely in hand during operation.

Another highlight of the RIDGID R3202 is its compatibility with various accessories. It utilizes the RIDGID Universal Fit System, which means that it can accommodate a wide selection of blades and sanding pads from multiple brands, giving users the flexibility to choose the best accessories for their specific projects. This ensures that whether you are performing precise cuts or detailed sanding, the tool is versatile enough to handle the job.

The multiple oscillating tool also features a removable dust extraction port, allowing users to maintain a cleaner workspace while minimizing dust inhalation during use. This is particularly essential for maintaining a safe and efficient working environment.

In addition to these features, the RIDGID R3202 is built with durability in mind. The tough construction materials ensure that it can withstand the rigors of job site use, providing reliable performance over time. This tool also comes with the RIDGID Lifetime Service Agreement, offering peace of mind through free parts and service for life, making it an excellent investment for both professionals and hobbyists.

Overall, the RIDGID R3202 is a powerful, flexible, and reliable oscillating multi-tool that stands out in the crowded market of power tools. Its combination of features, durability, and user comfort makes it an essential tool for a variety of cutting and sanding applications.
Top Page Image Contents