RIDGID R3202 manual Operating the SAW, See Figures 12

Page 15

OPERATION

OPERATING THE SAW

See Figures 12 - 14.

It is important to understand the correct method for operating the saw. Refer to the figures in this section to learn the correct and incorrect ways for handling the saw.

WARNING:

To make sawing easier and safer, always maintain proper control of the saw. Loss of control could cause an accident resulting in possible serious injury.

DANGER:

When lifting the saw from the workpiece, the blade is exposed on the underside of the saw until the lower blade guard closes. Make sure the lower blade guard is closed before setting the saw down.

To make the best possible cut, follow these helpful hints.

Hold the saw firmly with both hands.

Avoid placing your hand on the workpiece while making a cut.

Support the workpiece so that the cut (kerf) is always to your side.

Support the workpiece near the cut.

Clamp the workpiece securely so that the workpiece will not move during the cut.

Always place the saw on the workpiece that is supported, not the “cut off” piece.

Place the workpiece with the “good” side down.

Draw a guideline along the desired line of cut before beginning the cut.

Keep the cord away from the cutting area. Always place the cord to prevent it from hanging up on the workpiece while making a cut.

DANGER:

If the cord hangs up on the workpiece during a cut, release the switch trigger immediately. Unplug the saw and reposition the cord to prevent it from hanging up again.

DANGER:

Using a saw with a damaged cord could result in serious injury or death. If the cord has been damaged, have it replaced before using the saw again.

Fig. 12

Fig. 13

GUIDELINE

FULL LENGTH

KERF INDICATOR

Fig. 14

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Double Insulated OPERATOR’S ManualIntroduction Table of ContentsPersonal Safety General Power Tool Safety Warnings and InstructionsWork Area Safety Electrical SafetyCauses and Operator Prevention of Kickback Circular SAW Safety Warnings and InstructionsAdditional Safety Rules Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning ServiceElectrical Connection Cord Length Wire Size A.W.GElectrical Double InsulationProduct Specifications FeaturesAssembly See Attaching BladeRemoving Blade See Figures 2See Figures 4 OperationApplications KickbackBlade Guard System SAW BladesAdjusting Blade Depth STARTING/STOPPING the SAWIndexable Levers See Figures 12 Operating the SAWSee Figures 17 RIP CUTtingBevel Cutting See Figures 15Bevel Cutting Pocket CuttingAdjustments Positive 0 Bevel StopSee Figures 21 Power Supply cord Replacement MaintenanceAccessories General MaintenancePage HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyModel No R3202 Serial No Customer Service Information

R3202 specifications

The RIDGID R3202 is a sophisticated tool designed for professionals and DIY enthusiasts alike, primarily known for its versatility and robust performance in various tasks. This oscillating multi-tool excels in a wide range of applications, making it a valuable addition to any toolkit.

One of the key features of the R3202 is its powerful 3-amp motor, which delivers a variable speed range of 11,000 to 20,000 oscillations per minute. This allows users to adjust the speed according to the material being worked on, whether it's wood, metal, drywall, or other surfaces. The quick-release blade change system enhances productivity by enabling fast and effortless swaps between different attachments, ensuring you can switch tasks without delay.

The tool incorporates a 3.0-degree oscillation angle, providing efficient cutting and sanding operations while minimizing strain on the user. Additionally, the R3202 comes equipped with a rubber overmold grip for comfort and control, allowing users to work for longer periods without fatigue. This thoughtful design feature enhances grip, ensuring that the tool remains securely in hand during operation.

Another highlight of the RIDGID R3202 is its compatibility with various accessories. It utilizes the RIDGID Universal Fit System, which means that it can accommodate a wide selection of blades and sanding pads from multiple brands, giving users the flexibility to choose the best accessories for their specific projects. This ensures that whether you are performing precise cuts or detailed sanding, the tool is versatile enough to handle the job.

The multiple oscillating tool also features a removable dust extraction port, allowing users to maintain a cleaner workspace while minimizing dust inhalation during use. This is particularly essential for maintaining a safe and efficient working environment.

In addition to these features, the RIDGID R3202 is built with durability in mind. The tough construction materials ensure that it can withstand the rigors of job site use, providing reliable performance over time. This tool also comes with the RIDGID Lifetime Service Agreement, offering peace of mind through free parts and service for life, making it an excellent investment for both professionals and hobbyists.

Overall, the RIDGID R3202 is a powerful, flexible, and reliable oscillating multi-tool that stands out in the crowded market of power tools. Its combination of features, durability, and user comfort makes it an essential tool for a variety of cutting and sanding applications.
Top Page Image Contents