RIDGID R3202 manual RIP CUTting, Bevel Cutting, See Figures 15, See Figures 17

Page 16

OPERATION

RIP CUTting

See Figures 15 - 16.

Use a guide when making long or wide rip cuts with the saw.

To rip cut using optional edge guide:

Slide the edge guide into the slot.

Adjust the guide so that the "0" on the guide is aligned with the edge of your workpiece.

Secure the guide with the lock screw provided with the saw.

Secure the workpiece.

Position the face of the edge guide firmly against the edge of workpiece.

NOTE: The guiding edge of the workpiece must be straight for your cut to be straight. Use caution to prevent the blade from binding in the cut.

Saw along workpiece keeping guide firmly against edge to achieve a straight rip cut.

To rip cut using a straight edge:

Secure the workpiece.

Clamp a straight edge to the workpiece using C-clamps.

Saw along the straight edge to achieve a straight rip cut.

NOTE: Do not bind the blade in the cut.

BEVEL CUTTING

See Figures 17 - 19.

To make the best possible cut, follow these helpful hints:

Align the line of cut with the inner blade guide notch on the base when making 45° bevel cuts.

Make a trial cut in scrap material along a guideline to determine how much you should offset the guideline on the cutting material.

Adjust the angle of cut to any desired setting between zero and 56°. Positive stops are located at 0°, 45° and 56°. Refer to Adjusting Bevel Setting later in this manual.

Note: Push the positive 56° stop button in while raising the motor housing to set the bevel setting above 45° and up to 56°.

Adjusting Bevel Setting:

Unplug the saw.

Pull the bevel adjustment lever upward until the motor housing moves freely.

Rotate motor housing end of saw until you reach the desired angle setting on bevel scale.

Note: Positive stops are located at 0°, 45° and 56°. Push the positive 56° stop button in while raising the

motor housing to set the bevel setting above 45° and up to 56°.

Push downward on the bevel adjustment lever until the motor housing is securely locked in place.

lock screw

edge guide

Fig. 15

C-CLAMP

STRAIGHT

EDGE

GUIDELINE

WORKPIECE

C-CLAMP

Fig. 16

56° BEVEL

BUTTON

 

56

 

56

 

0

BEVEL

 

ADJUSTMENT

 

LEVER

Fig. 17

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents OPERATOR’S Manual Double InsulatedTable of Contents IntroductionGeneral Power Tool Safety Warnings and Instructions Work Area SafetyElectrical Safety Personal SafetyCircular SAW Safety Warnings and Instructions Causes and Operator Prevention of KickbackAdditional Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningCord Length Wire Size A.W.G ElectricalDouble Insulation Electrical ConnectionFeatures Product SpecificationsAssembly Attaching Blade Removing BladeSee Figures 2 SeeOperation ApplicationsKickback See Figures 4SAW Blades Blade Guard SystemSTARTING/STOPPING the SAW Adjusting Blade DepthIndexable Levers Operating the SAW See Figures 12RIP CUTting Bevel CuttingSee Figures 15 See Figures 17Pocket Cutting Bevel CuttingPositive 0 Bevel Stop AdjustmentsSee Figures 21 Maintenance AccessoriesGeneral Maintenance Power Supply cord ReplacementPage Warranty DAY Satisfaction Guarantee PolicyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredCustomer Service Information Model No R3202 Serial No

R3202 specifications

The RIDGID R3202 is a sophisticated tool designed for professionals and DIY enthusiasts alike, primarily known for its versatility and robust performance in various tasks. This oscillating multi-tool excels in a wide range of applications, making it a valuable addition to any toolkit.

One of the key features of the R3202 is its powerful 3-amp motor, which delivers a variable speed range of 11,000 to 20,000 oscillations per minute. This allows users to adjust the speed according to the material being worked on, whether it's wood, metal, drywall, or other surfaces. The quick-release blade change system enhances productivity by enabling fast and effortless swaps between different attachments, ensuring you can switch tasks without delay.

The tool incorporates a 3.0-degree oscillation angle, providing efficient cutting and sanding operations while minimizing strain on the user. Additionally, the R3202 comes equipped with a rubber overmold grip for comfort and control, allowing users to work for longer periods without fatigue. This thoughtful design feature enhances grip, ensuring that the tool remains securely in hand during operation.

Another highlight of the RIDGID R3202 is its compatibility with various accessories. It utilizes the RIDGID Universal Fit System, which means that it can accommodate a wide selection of blades and sanding pads from multiple brands, giving users the flexibility to choose the best accessories for their specific projects. This ensures that whether you are performing precise cuts or detailed sanding, the tool is versatile enough to handle the job.

The multiple oscillating tool also features a removable dust extraction port, allowing users to maintain a cleaner workspace while minimizing dust inhalation during use. This is particularly essential for maintaining a safe and efficient working environment.

In addition to these features, the RIDGID R3202 is built with durability in mind. The tough construction materials ensure that it can withstand the rigors of job site use, providing reliable performance over time. This tool also comes with the RIDGID Lifetime Service Agreement, offering peace of mind through free parts and service for life, making it an excellent investment for both professionals and hobbyists.

Overall, the RIDGID R3202 is a powerful, flexible, and reliable oscillating multi-tool that stands out in the crowded market of power tools. Its combination of features, durability, and user comfort makes it an essential tool for a variety of cutting and sanding applications.
Top Page Image Contents