RIDGID AC9944 manual Attaching SAW to the Mounting Brackets, See Figures 11, Hex Nut

Page 10

ASSEMBLY

WARNING:

The saw mounting brackets are designed to fit snugly over the table edges with locking levers in the open position. With the locking levers in the lowered (locked) position, you should not be able to slide the saw mounting bracket assembly along the table edges or remove the bracket assembly from the table edges. If the saw mounting brackets will not fit over the edges, or if the brackets can be removed from the edges when the levers are locked, remove bracket assembly immediately and adjust bracket adjustment screw. See the Maintenance section of this manual. Failure to heed this warning may result in serious personal injury.

ATTACHING SAW TO THE MOUNTING BRACKETS

See Figures 11 - 12.

Always position the saw to achieve maximum balance and stability. All four corners of the saw must be bolted to the mounting brackets before use. Make sure bolts do not extend above the table of the miter saw.

NOTE: Four additional 1-1/2 in. bolts have been provided for use when securing a sliding miter saw to the mounting brackets.

NOTE: Ensure that mounting brackets can be clamped securely onto stand before mounting saw. If locking lever on saw mounting bracket cannot easily be pushed down into the closed position, the adjustment screw is too tight. Do not force locking lever into the closed position. Loosen the adjustment screw. Refer to the Maintenance section later in this manual for mounting bracket adjustment.

If the saw has mounting holes that line up with the slots in the saw mounting brackets:

Disconnect the saw from power supply and lock the saw arm in the down position.

Place a 2 x 4 or similar type of stable support underneath the saw to raise the saw and allow access to the saw’s mounting feet.

Feed a carriage bolt up through each side of the bracket and adjustment plate.

Align bolts in the two sliding adjustment plates on the saw mounting bracket with the saw mounting holes.

Place the saw mounting bracket underneath the raised side of the saw, and insert bolts through mounting holes in saw.

Loosely secure in place using a flat washer, lock washer, and hex nut.

Repeat procedure to attach second bracket to saw.

After making sure both brackets are parallel to each other, lightly tighten all four nuts to hold in position.

If the saw has holes that do not line up with the sliding adjustment plates in the saw mounting brackets:

HEX NUT

 

LOCK

 

 

WASHER

 

 

FLAT WASHER

 

 

 

SAW ARM

 

 

SLIDING

 

STABLE

ADJUSTMENT

CARRIAGE

PLATE

SUPPORT

BOLT

 

 

 

CARRIAGE BOLT

SAW LOADING SLOTS

MOUNTING BRACKET

Fig. 11

HEX NUT

LOCK

WASHER

FLATWASHER

MOUNTING

HEX BOLT SURFACE

SAW

MOUNTING

BRACKET

CARRIAGE BOLT

Fig. 12

 

 

Disconnect the saw from power supply and lock saw arm in the down position.

Mount the saw to a mounting surface at least 1/2 in. thick using 5/16 hex head bolts, washers, and nuts (not included).

Drill holes in the mounting surface to match the sliding adjustment plates in the saw mounting brackets.

Proceed with installation as previously described.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual Table of Contents IntroductionRules for Safe Operation  Before Making a CUT, be Sure ALL Adjustments are SecureRead ALL Instructions Symbols Symbol Signal MeaningTools Needed FeaturesAdjustable Wrenchs Work StopLoose Parts Unpacking AssemblyPreparing the Workstand for Assembly See Figures 4See Figures 5 Securing the Lift Assist HandleAttaching the LEG Supports See FigureAttaching the Transport Handle Installing the Work SupportsAttaching the Wheels See Figures 11 Attaching SAW to the Mounting BracketsHEX NUT Handles Mounting the Miter SAW to the WorkstandSee Figures 13 Locking LeverTo remove saw from workstand SetupOpening the Workstand See Figures 15Closing and Moving the Workstand Fold DownApplications Using the Extension Arms and Support LegsOperation See Figures 18To adjust work support distance Using the Work SupportTo adjust the work support Work SupportCleaning and Lubricating MaintenanceGeneral Maintenance See Figures 21SAW Wrench SAW Mounting Bracket AdjustmentTo adjust Mounting BracketPage What is Covered Under the 3 Year Limited Service Warranty WarrantyDAY Satisfaction Guarantee Policy HOW to Obtain Service What is not CoveredCustomer Service Information Model No AC9944 Serial No

AC9944 specifications

The RIDGID AC9944 is a powerful and versatile accessory designed specifically for use with RIDGID's lineup of high-performance vacuum cleaners. This accessory serves as an essential tool for various cleaning tasks, making it a favorite among both professional and DIY users.

One of the main features of the RIDGID AC9944 is its advanced filtration system. The filter is capable of trapping small particles, ensuring that the air expelled from the vacuum is cleaner and healthier. This feature is particularly beneficial for those who suffer from allergies or respiratory issues, as it helps reduce the presence of dust and allergens in the environment. The AC9944 filter is designed to be easy to maintain and replace, ensuring longevity and consistent performance.

Another key characteristic of this accessory is its robust construction. Made from high-quality materials, the AC9944 is designed to withstand the rigors of daily use. Whether you are tackling a heavy-duty cleanup job at a construction site or performing routine household cleaning, this product is built to last. Its durability ensures that users can rely on it for years without experiencing degradation in performance.

The RIDGID AC9944 includes specialized attachments that enhance its functionality. With a variety of nozzles and hoses, users can customize their cleaning approach to fit specific tasks. The attachments allow for efficient cleaning of different surfaces, whether it's carpets, hardwood floors, or hard-to-reach spaces. This versatility makes it an invaluable tool in any cleaning arsenal.

Additionally, the RIDGID AC9944 features an ergonomic design that promotes user comfort. The vacuum's lightweight construction and well-placed handles make it easy to maneuver and control, reducing user fatigue during extended cleaning sessions. The thoughtful design ensures that both professional users and home cleaners can achieve optimal results without strain.

The technologically advanced nature of the AC9944 is evident in its compatibility with RIDGID's smart cleaning solutions. It integrates seamlessly with RIDGID's existing vacuum systems, allowing for enhanced performance and efficiency. Users can take advantage of innovative features like smart sensors and automatic adjustments to suction power based on the type of surface being cleaned.

In conclusion, the RIDGID AC9944 combines advanced filtration, robust construction, versatile attachments, ergonomic design, and smart technology compatibility to create a powerful cleaning accessory. Whether for professional use or home cleaning, the AC9944 is engineered to meet the diverse needs of users, delivering exceptional performance and reliability. Its thoughtful design and innovative features make it an indispensable tool for achieving a cleaner, healthier environment.
Top Page Image Contents