RIDGID AC9944 manual SAW Mounting Bracket Adjustment, SAW Wrench, Screwdriver, To adjust

Page 17

MAINTENANCE

WARNING:

SAW

WRENCH

The saw mounting brackets are designed to fit snugly over the table edges with locking levers in the open position. With the locking levers in the lowered (locked) position, you should not be able to slide the saw mounting bracket assembly along the table edges or remove the bracket assembly from the table edges. If the saw mounting brackets will not fit over the edges, or if the brackets can be removed from the edges when the levers are locked, remove bracket assembly immediately and adjust bracket adjustment screw. Failure to heed this warning may result in serious personal injury.

SAW MOUNTING BRACKET ADJUSTMENT

See Figure 23.

If the saw and bracket assembly can slide over the table edges or be removed from the table edges when the levers are locked, the bracket adjustment screws need to be tightened. If the saw and bracket assembly will not fit over both table edges, the bracket adjustment screw needs to

MOUNTING

BRACKET

NUT

SCREWDRIVER

be loosened.

NOTE: The saw should be removed from the mounting brackets before attempting to tighten or loosen the bracket adjustment screws.

To adjust:

Use a wrench to slightly loosen the nut.

Turn the screw with a phillips screwdriver. Rotate clockwise if the bracket assembly needs to be tightened or counterclockwise if the assembly needs to be loosened.

NOTE: If locking lever on saw mounting bracket cannot easily be pushed down into the closed position, the adjustment screw is too tight. Do not force locking lever into the closed position. Loosen the adjustment screw.

Install the bracket on the front table edge then lower bracket to allow the rear clamp of the bracket to seat fully over the rear table edge.

NOTE: The mounting bracket should fit snugly over the table edges when in the open position.

When the correct position is achieved, wrench-tighten the nut to secure.

Repeat with the second mounting bracket.

To purchase additional saw mounting bracket assemblies (part no. 900510802), call RIDGID customer service at 1-866-539-1710.

BRACKET

 

ADJUSTMENT

SCREWDRIVER

SCREW

ACCESS HOLE

 

Fig. 23

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents OPERATOR’S Manual Introduction Table of ContentsRead ALL Instructions  Before Making a CUT, be Sure ALL Adjustments are SecureRules for Safe Operation Symbol Signal Meaning SymbolsAdjustable Wrenchs FeaturesTools Needed Work StopLoose Parts Preparing the Workstand for Assembly AssemblyUnpacking See Figures 4Attaching the LEG Supports Securing the Lift Assist HandleSee Figures 5 See FigureAttaching the Wheels Installing the Work SupportsAttaching the Transport Handle HEX NUT Attaching SAW to the Mounting BracketsSee Figures 11 See Figures 13 Mounting the Miter SAW to the WorkstandHandles Locking LeverOpening the Workstand SetupTo remove saw from workstand See Figures 15Fold Down Closing and Moving the WorkstandOperation Using the Extension Arms and Support LegsApplications See Figures 18To adjust the work support Using the Work SupportTo adjust work support distance Work SupportGeneral Maintenance MaintenanceCleaning and Lubricating See Figures 21To adjust SAW Mounting Bracket AdjustmentSAW Wrench Mounting BracketPage DAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredModel No AC9944 Serial No Customer Service Information

AC9944 specifications

The RIDGID AC9944 is a powerful and versatile accessory designed specifically for use with RIDGID's lineup of high-performance vacuum cleaners. This accessory serves as an essential tool for various cleaning tasks, making it a favorite among both professional and DIY users.

One of the main features of the RIDGID AC9944 is its advanced filtration system. The filter is capable of trapping small particles, ensuring that the air expelled from the vacuum is cleaner and healthier. This feature is particularly beneficial for those who suffer from allergies or respiratory issues, as it helps reduce the presence of dust and allergens in the environment. The AC9944 filter is designed to be easy to maintain and replace, ensuring longevity and consistent performance.

Another key characteristic of this accessory is its robust construction. Made from high-quality materials, the AC9944 is designed to withstand the rigors of daily use. Whether you are tackling a heavy-duty cleanup job at a construction site or performing routine household cleaning, this product is built to last. Its durability ensures that users can rely on it for years without experiencing degradation in performance.

The RIDGID AC9944 includes specialized attachments that enhance its functionality. With a variety of nozzles and hoses, users can customize their cleaning approach to fit specific tasks. The attachments allow for efficient cleaning of different surfaces, whether it's carpets, hardwood floors, or hard-to-reach spaces. This versatility makes it an invaluable tool in any cleaning arsenal.

Additionally, the RIDGID AC9944 features an ergonomic design that promotes user comfort. The vacuum's lightweight construction and well-placed handles make it easy to maneuver and control, reducing user fatigue during extended cleaning sessions. The thoughtful design ensures that both professional users and home cleaners can achieve optimal results without strain.

The technologically advanced nature of the AC9944 is evident in its compatibility with RIDGID's smart cleaning solutions. It integrates seamlessly with RIDGID's existing vacuum systems, allowing for enhanced performance and efficiency. Users can take advantage of innovative features like smart sensors and automatic adjustments to suction power based on the type of surface being cleaned.

In conclusion, the RIDGID AC9944 combines advanced filtration, robust construction, versatile attachments, ergonomic design, and smart technology compatibility to create a powerful cleaning accessory. Whether for professional use or home cleaning, the AC9944 is engineered to meet the diverse needs of users, delivering exceptional performance and reliability. Its thoughtful design and innovative features make it an indispensable tool for achieving a cleaner, healthier environment.
Top Page Image Contents