RIDGID AC9944 Attaching the Transport Handle, Attaching the Wheels, Installing the Work Supports

Page 9

ASSEMBLY

ATTACHING THE TRANSPORT HANDLE

See Figure 8.

Align transport handle ends with holes in stand table end caps and insert.

Place a spring washer over the screw and insert screw through each hole of the handle and leg support bracket.

Place a washer and lock nut over the end of each screw and secure.

ATTACHING THE WHEELS

See Figure 9.

Insert bolt through wheel leg set.

Place washer and then wheel over bolt.

Place washer and lock nut over end of bolt and secure.

Do not overtighten.

Place end cap over lock nut.

Repeat on other side.

After wheels are installed and all previous assembly procedures have been followed, workstand may be turned over to rest on its legs.

NOTE: The workstand is heavy. Get help when needed.

INSTALLING THE WORK SUPPORTS

See Figure 10.

The work supports support the workpiece during cutting operations.

To install the work supports:

Loosen lock lever and slide extension arm out for accessibility.

Position work support bracket so that the work support shaft is positioned in the center of the stand table.

Align large square hole in work support bracket with end of extension arm and slide bracket over rail.

Insert the work support in shaft of bracket.

Insert adjustment knob through knob hole in shaft of bracket and tighten to secure into position.

Insert adjustment knob through knob hole on top of bracket and tighten to secure into position.

Repeat on the other side.

Ensure workstand is stable and can be opened and locked.

TRANSPORT

HANDLE

 

SPRING

 

LOCK NUT

SCREW

WASHER

WASHER

Fig. 8

 

END CAP

WHEEL

 

 

 

 

 

WASHER

 

 

 

 

WASHER

 

LOCK NUT

HEX BOLT

 

 

LEG

ASSEMBLY

Fig. 9

WORK

 

SUPPORT

ADJUSTMENT

 

KNOB

 

SHAFT

 

 

WORK

 

 

SUPPORT

 

EXTENSION

BRACKET

 

ARM

 

 

LOCK LEVER

 

TIGHTEN

LOOSEN

Fig. 10

 

9

Image 9
Contents OPERATOR’S Manual Introduction Table of Contents Before Making a CUT, be Sure ALL Adjustments are Secure Rules for Safe OperationRead ALL Instructions Symbol Signal Meaning SymbolsAdjustable Wrenchs FeaturesTools Needed Work StopLoose Parts Preparing the Workstand for Assembly AssemblyUnpacking See Figures 4Attaching the LEG Supports Securing the Lift Assist HandleSee Figures 5 See FigureInstalling the Work Supports Attaching the Transport HandleAttaching the Wheels Attaching SAW to the Mounting Brackets See Figures 11HEX NUT See Figures 13 Mounting the Miter SAW to the WorkstandHandles Locking LeverOpening the Workstand SetupTo remove saw from workstand See Figures 15Fold Down Closing and Moving the WorkstandOperation Using the Extension Arms and Support LegsApplications See Figures 18To adjust the work support Using the Work SupportTo adjust work support distance Work SupportGeneral Maintenance MaintenanceCleaning and Lubricating See Figures 21To adjust SAW Mounting Bracket AdjustmentSAW Wrench Mounting BracketPage DAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredModel No AC9944 Serial No Customer Service Information

AC9944 specifications

The RIDGID AC9944 is a powerful and versatile accessory designed specifically for use with RIDGID's lineup of high-performance vacuum cleaners. This accessory serves as an essential tool for various cleaning tasks, making it a favorite among both professional and DIY users.

One of the main features of the RIDGID AC9944 is its advanced filtration system. The filter is capable of trapping small particles, ensuring that the air expelled from the vacuum is cleaner and healthier. This feature is particularly beneficial for those who suffer from allergies or respiratory issues, as it helps reduce the presence of dust and allergens in the environment. The AC9944 filter is designed to be easy to maintain and replace, ensuring longevity and consistent performance.

Another key characteristic of this accessory is its robust construction. Made from high-quality materials, the AC9944 is designed to withstand the rigors of daily use. Whether you are tackling a heavy-duty cleanup job at a construction site or performing routine household cleaning, this product is built to last. Its durability ensures that users can rely on it for years without experiencing degradation in performance.

The RIDGID AC9944 includes specialized attachments that enhance its functionality. With a variety of nozzles and hoses, users can customize their cleaning approach to fit specific tasks. The attachments allow for efficient cleaning of different surfaces, whether it's carpets, hardwood floors, or hard-to-reach spaces. This versatility makes it an invaluable tool in any cleaning arsenal.

Additionally, the RIDGID AC9944 features an ergonomic design that promotes user comfort. The vacuum's lightweight construction and well-placed handles make it easy to maneuver and control, reducing user fatigue during extended cleaning sessions. The thoughtful design ensures that both professional users and home cleaners can achieve optimal results without strain.

The technologically advanced nature of the AC9944 is evident in its compatibility with RIDGID's smart cleaning solutions. It integrates seamlessly with RIDGID's existing vacuum systems, allowing for enhanced performance and efficiency. Users can take advantage of innovative features like smart sensors and automatic adjustments to suction power based on the type of surface being cleaned.

In conclusion, the RIDGID AC9944 combines advanced filtration, robust construction, versatile attachments, ergonomic design, and smart technology compatibility to create a powerful cleaning accessory. Whether for professional use or home cleaning, the AC9944 is engineered to meet the diverse needs of users, delivering exceptional performance and reliability. Its thoughtful design and innovative features make it an indispensable tool for achieving a cleaner, healthier environment.