ASSEMBLY
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
Inspect the product carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.
PREPARING THE WORKSTAND FOR ASSEMBLY
See Figures 4 - 5.
With workstand out of box and packaging removed, place unit upside down on ground.
Pull lock knob on leg set and raise legs until locked into open position.
Rotate lift assist handle to operational position.
While holding spring loaded wheel leg set firmly, cut cable tie.
CAUTION:
Wheel legs are spring loaded. Hold wheel legs to prevent from snapping up when releasing lock mechanism release lever. Failure to do so may result in possible injury.
RAISE |
|
LEGS | LEG SET |
RELEASE
LEGS
LOCK 
LEGS
LOCK
KNOB
|
| Fig. 4 | |
ROTATE | WHEEL | RAISE WHEEL | |
RELEASE LEVER | |||
LIFT ASSIST |
| LEGS AND LOCK | |
HANDLE |
| INTO POSITION | |
|
| 3 | |
CABLE |
| 4 | |
TIE | 1 | ||
|
2
HOLD WHEEL LEG
SET FIRMLY
SPRING LOADED
WHEEL LEG SET
Fig. 5
Pull up on lock mechanism release lever and carefully raise wheel legs.
Continue to raise wheel leg set until locked into position.
7