Rite Life 393, 394 manual Technical Specifications, Weight

Page 25

5. Technical Specifications

Design Conformance:

A.N.S.I. PH2.9-1974*

Unit-to-Unit Repeatability:

±.02 Log Exposure

Exposure Stability:

±.02 Log Exposure per year

Temperature Sensitivity:

±.02 Log Exposure from 59°F (15°C) - 86°F (30°C)

Electrical Required:

9-Volt alkaline battery

Light Modulation:

21-Step Wedge, 0.15D per step

Blue Color Peak Wavelength:

460nm ±10nm

Green Color Peak Wavelength:

510nm ±10nm

Warm-up Time:

Instantaneous

Recycle Time:

2Seconds

Dimensions:

8.5in. (21.59cm) W x 5.25in. (13.34cm) D x 3.0in (7.62cm) H

Weight:

2-1/2 lbs. (1.13kg.)

*American National Standards Institute compliance except as noted.

This instrument may be covered by one or more patents. Refer to the instrument for actual patent numbers.

Specifications and design subject to change without notice.

19

Image 25

Contents 393/394 Sensitometer Page FCC Proprietary Notice CE DeclarationIii Limited WarrantyTable Of Contents Unpacking and Inspection Getting StartedInstrument Description Applying Power Sensitometer Monitoring For Process Control Application and ProceduresSelection and Use of Film Log E CurveScheduling Sensitometric Control Processing ProcedureManual Data Recording Procedure Daily Plotting of Data on Process Control Record Developer Type Developer vendor identificationPrinting Process Control Records Automatic Data Recording Procedure-Using DensitometerSpeed Index Base+Fog Possible Cause Processor TroubleshootingSetting Exposure Color Using the SensitometerSelecting Single or Dual Exposure 394 only Adjusting Exposure SettingExposure Setting Exposing Film Important Notes Repair Information General MaintenanceCalibration/Recertification General Cleaning Cleaning the InstrumentCleaning the Step Tablet Replacing the Battery Weight Technical SpecificationsPage Page 393-500 Rev. O-4/28/04