Rite Life 394, 393 manual CE Declaration, Proprietary Notice

Page 4

CE DECLARATION

Manufacturer’s Name

X-Rite, Incorporated

Manufacturer’s Address:

3100 44th Street, S.W.

 

Grandville, Michigan

 

49418 U.S.A.

Model Name:

Sensitometer

Model No.:

393 and 394

Directive(s) Conformance:

EMC 89/336/EEC

WARNING

This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Proprietary Notice

The information contained in this manual is derived from patent and proprietary data of X-Rite, Incorporated. This manual has been prepared solely for the purpose of assisting in the use and general maintenance of this instrument.

The contents of this manual are the property of X-Rite, Incorporated and are copyrighted. Any reproduction in whole or part is strictly prohibited. Publication of this information does not imply any rights to reproduce or use this manual for any purpose other than installing, operating, or maintaining this instrument. No part of this manual may be reproduced, transcribed, transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, magnetic, mechanical, optical, manual, or otherwise, without the prior written permission of an officer of X-Rite, Incorporated.

©2002 by X-Rite, Incorporated. “ALL RIGHTS RESERVED”

ii

Image 4
Contents 393/394 Sensitometer Page FCC CE Declaration Proprietary NoticeLimited Warranty IiiTable Of Contents Getting Started Unpacking and InspectionInstrument Description Applying Power Application and Procedures Sensitometer Monitoring For Process ControlLog E Curve Selection and Use of FilmProcessing Procedure Scheduling Sensitometric ControlManual Data Recording Procedure Developer Type Developer vendor identification Daily Plotting of Data on Process Control RecordAutomatic Data Recording Procedure-Using Densitometer Printing Process Control RecordsProcessor Troubleshooting Speed Index Base+Fog Possible CauseUsing the Sensitometer Setting Exposure ColorAdjusting Exposure Setting Selecting Single or Dual Exposure 394 onlyExposure Setting Exposing Film Important Notes Repair Information General MaintenanceCalibration/Recertification General Cleaning Cleaning the InstrumentCleaning the Step Tablet Replacing the Battery Technical Specifications WeightPage Page 393-500 Rev. O-4/28/04