What you need, What’s included | Regent Sheffield FCTWL65 specification

™FCTWL65

Congratulations! You have purchased a Regent Cool Touch™ 65 watt heavy- duty fluorescent worklight. This worklight operates cooler, safer, and is more ener- gy efficient than conventional halogen worklights. It has a durable, die-cast alu - minum housing and a tubular-steel stand for heavy-duty use. The fixture includes a comfortable foam-grip handle and non-skid rubber grips on the base of the stand.

What you need

• Phillips head screwdriver

What’s included

• Fluorescent worklight (A)

• 65 watt fluorescent bulb (B)

What to know

IMPORTANT READ ALL SAFETY INSTRUCTIONS.

WARNING: When using outdoor portable lamps, basic safety instructions should always be followed to reduce the risk of fire, electric shock, and personal injury, includ- ing the following:

•Use only three wire outdoor extension cords that have three-prong grounding plugs and grounding receptacles that accept the appliance’s plug.

•Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for the wet location portable lamp. Receptacles are available having built-in GFCI protection and are able to be used for this measure of safety.

•Use only with an extension cord for outdoor use, such as an extension cord type SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A, SJOW, SJOW-A, SJTW, SJTW-A, SJTOW, or SJTOW-A.

• For indoor and outdoor use .

•UL LISTED for wet locations.

•This device complies with Part 18 of the FCC Rules. Any changes or modifi- cations to the product described in this instruction sheet that are not expressly approved by Cooper Lighting could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter- mined by turning the equiment off and on, the user is encouraged to try to cor- rect the inteference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.