Sears 315.10186 BIT Storage, Screwdriving Torque Adjustment, To Adjust Torque, To Decrease Torque

Page 11

SCREW'DRIVING

TORQUE ADJUSTMENT

(Driving power of your drill-driver)

When using your drill-driverfor varlous driving applica- tions, it becomes necessary to increase or decrease the torque in order to help prevent the possibilityof damaging screw heads, threads, workplace, etc. In general, torque shouldcorrespondto the intensityof the screw diameter. If the torque is too high or the screws too small,the screws may be damaged or broken.

The torque "isadjusted by rotatingthe torque adjustment ring. See Figure7. The torque is greater when the torque adjustment ring is set on a higher setting. The torque is less when the torque adjustmentdng Is set on a lower setting.

The propersettingdepends on the type of materialand the size of screw you are using.

TO ADJUST TORQUE

Identify the four torque Indicator settingslocated on the fi'ontof your drill.See Figure7.

Rotate adjustmentring to the desired set'ring.

Position_: For ddvingsmall screws.

Pos_on 2: For ddvlngscrews Into soft material.

• Pos_on3:

For drivingscrews into hard wood.

41,_1

For heavy ddUing.

TO DECREASE TORQUE

TORQUE /LJ),IUS'INENTRING

BIT STORAGE

See Figure 8.

When not in use, bits provided with your drillcan be placed In the storage area locatedon the top of your drill as shown in figure 8.

BIT

STORAGE

Fig. B

Fig. 7

11

Image 11
Contents Customer Help Line Operators Manual Mm Cordless DRILL-DRIVEROperators manual Pay dose attention to Workarea Electrical SafetyPersonal Safety Tool USE and CareAdditional Rules for Safe Operation ServiceImportant Rules for Battery Tools Page Symbol Meaning Symbol Name DESIGNATION/EXPLANATIONSwitch Trigger Instructions Packing List To Remove BATrERY Pack To Install Baiiery PackIndicator Charging Your DRILL-DRIVERVariable Speed SwitchSwitch Lock Keyless ChuckTo Decrease Torque Screwdriving Torque AdjustmentTo Adjust Torque BIT StorageChuckcollar Installing BitsJews Release Unlock Grip Tighten Chuckbody Removing BitsDrilling Chuckjaws Chuck RemovalTo Retighten a Loose Chuck Preparation for Recycling BatteriesBATrERY Pack Removal Page See Back page for Parts Ordering Instructions Companion 14.4 Volt Cordless DrillPage Description QTY Motor and Gear Train AssemblyCompanion 3/8 In .4 Volt Cordless DRILL-DRIVER Model Number KEY Part NO. NumberRED Black Lead Blue Lead RED Lead Heat SinkCall anytime, day or night U.S.A. only Www,sears.€om Call anyUme, day or night U.S.A. and Canada