Emerson KF160OI01 White, Ceiling Cover, Lockwasher Knurled, Nut, Light, Fitter, Threaded, Nipple

Page 10

BP7283, High Country, KF160 7/31/06 10:54 AM Page 10

STANDARD ON-OFF WALL

 

SWITCH OR OPTIONAL SW115

BLACK

WALL CONTROL

TO

BLACK

(HOT)

120-

 

VOLT

 

SUPPLY

 

 

WHITE

 

GROUND

BLACK

WHITE

WHITE

BLACK

TWO-CONDUCTOR

CABLE (WITH

GROUND)

GREEN WIRE (GROUND)

FROM HANGER BALL AND

HANGER BRACKET

Figure 13

BLUE WHITE ORANGE

BLACK

BLUE WHITE

ORANGE

HANGER BALL

3. Push the wires and connectors up into the outlet box while inserting the receiv- er fully into the hanger bracket. Position the antenna wire on top of the receiver.

4. Screw the two 1-1/4” threaded studs (supplied) into the tapped holes in the hanger bracket (Figure 12).

5. Lift the ceiling cover up to the threaded studs and turn until the studs protrude through the holes in the ceiling cover (Figure 13).

6. Secure the ceiling cover in place by sliding lockwashers (supplied) over the threaded studs and installing the two knurled knobs (supplied). (Figure 14). Tighten the knurled knobs securely until the ceiling cover fits snugly against the ceiling.

CEILING

COVER

!WARNING

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

NOTE: If you wish to operate your ceil- ing fan with the downlight fixture attached, perform steps 7 and 8. Otherwise, skip to step 9.

7. For Operating Your Fan With the Downlight Fixture. Remove the thread- ed plug from the light fitter adapter. Feed the black and white wires of the light fitter assembly through the hole in the adapter and screw the threaded nipple of the light fitter into the adapter hole (Figure 15). Install nut and lock- washer onto threaded nipple inside of adapter and securely tighten.

LOCKWASHER

(2)

KNURLED

KNOB (2)

Figure 14

NUT

LOCKWASHER

 

LIGHT

 

FITTER

THREADED

ADAPTER

PLUG

 

THREADED

LIGHT FITTER

 

STUD (2)

 

Figure 15

THREADED

10

NIPPLE

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents High Country Safety Instructions Additional Safety Instructions for InstallationMaterials Setting Operating Frequency of Transmitter Receiver General Preset Memory FeatureInstallation of Battery GeneralRubber Washer Upper Glass Motor Housing Assembly How to Assemble Your Ceiling FanElectrical Requirements Truss Head Adapter Plate Cutout for Flange Screw Access BladeFiber Washer ScrewHairpin Clip Setscrew Downrod Motor Coupling Clevis PIN Decorative Scroll AssemblyGrommet PINTAB How to Hang Your Ceiling FanCeiling Outlet BOX TWO Screws Supplied With AT LeastHow to Wire Your Ceiling Fan Lockwasher Knurled WhiteCeiling Cover NUTLight Fitter Socket Threaded Light Fitter Adapter White WireAdapter Light Fitte Assembly Lower GlassLowremote Control Transmitter Installation Storage BracketOperating Your Ceiling Fan MaintenanceAccessories Important Care InstructionsTrouble Shooting Trouble Probable Cause Suggested RemedyRepair Parts Listing Description KF160OI01Limited Warranty

KF160OI01 specifications

The Emerson KF160OI01 is a cutting-edge cooling solution designed for commercial and industrial applications, boasting a range of features that cater to efficiency, reliability, and ease of use. One of the standout aspects of this unit is its advanced refrigerant technology, which utilizes eco-friendly refrigerants to reduce environmental impact while maximizing cooling performance.

At its core, the KF160OI01 is engineered with a high-efficiency compressor that operates quietly and effectively, ensuring optimal performance while keeping energy costs low. This compressor is paired with a high-capacity condenser coil that enhances heat exchange capabilities, allowing the unit to cool large spaces quickly and effectively. This makes the KF160OI01 ideal for environments that require rapid temperature control, such as restaurants, warehouses, and manufacturing facilities.

Additionally, the Emerson KF160OI01 incorporates intelligent control systems that allow for precise temperature regulation. These smart controls enable users to set specific temperature thresholds and monitor energy consumption, enhancing overall operational efficiency. The inclusion of a digital display and user-friendly interface further simplifies the monitoring and adjustment of settings, making it easy for operators to maintain optimal conditions.

Durability is another significant characteristic of the KF160OI01. The unit is built with robust materials designed to withstand the rigors of continuous operation in demanding environments. This longevity is complemented by a built-in self-diagnostic feature that alerts users to any potential issues before they escalate, minimizing downtime and maintenance costs.

Furthermore, the KF160OI01 is designed with flexibility in mind. Its modular construction allows for easy integration into existing systems or replacement of older units. This adaptability ensures that it can meet a variety of installation requirements while providing consistent performance.

In summary, the Emerson KF160OI01 represents a pinnacle of innovation in commercial cooling technology. With its focus on energy efficiency, advanced controls, and durability, it stands out as a reliable solution for businesses looking to enhance their environmental comfort while minimizing costs and energy consumption. As industries increasingly prioritize sustainable practices, the KF160OI01 is poised to meet future demands, making it a wise investment for any commercial operation.
Top Page Image Contents