Sears 113.244530 owner manual Tensioning the Blade, Lock and unplug before making any adjust Ments

Page 10

7.The upper wheel needs to be placed in its lowest

position. Locate the tension lock knob on the back of the saw and turn it counterclockwise

approximately two turns. Lift the tension catch away from the teeth and move it to its lowest position.

CAUTION: To avoid being scraped, if the blade should suddenly uncoil, wear safety goggles. Carefully uncoil the blade holding it at arms length.

8.Uncoil the blade.

9.Slide the blade into the slot of the table with the teeth facing forward and down toward the table.

10.Place the blade on all three wheels. Center the blade on the rubber tires.

WARNING: Push the knob off, lock with a pad-I

lock and unplug before making any adjust- I

ments.

I

TENSIONING THE BLADE

1.With one hand on the knob and the other on the

tension catch, lift up on the tension assembly until the slack in the blade is eliminated. Note which

notch the top of the tension catch is closest to.

Tension

Catch

Tension Wheel

Idler Wheel

Tension

Adjusting

Knob

Slot in Table

Drive Wheel

10

Image 10

Contents 9ARS Variable Speed 10-1NCH Band SAWBefore Using the SAW Safety Instructions for Band SawFull ONE Year Warranty on Craftsman Band SAW When Installing or Moving the SAWPlan your work Inspect your workpieceBefore Leaving the SAW Lock the switch Unplug the sawGlossary of terms FPMFire hazard and may also create a shock hazard Motor specifications and electrical requirementsConnecting to Power Supply Outlet FeetUnpacking and checking contents Mounting Band SAW to Workbench AssemblyTable of Loose Parts QTY Clamping Bandsaw to WorkbenchInstalling the Table Tonn,on I JInstalling the Blade Installing bladeTensioning the Blade Lock and unplug before making any adjust MentsWith one hand on the knob and the other on Padlock, and unplug before making any adjust- ments Adjusting the Blade Guides and BACK-UP BearingTracking the Blade Cover l Final Table AssemblyAligning the Table Square To the Blade Open. Thrown blades can cause injuryInstalling the Hose Clip Getting to know your band saw Upper slide lock knob... The upper blade guideON-OFF Knoi Tended Until IT has Come to a Complete StopBlade Type and Approximate Speed for Cutting Basic Saw OperationsChoice of Blade and Speed Material Speed BladeWhenever SAW is Running Enough to cause a severe injuryTires MaintenanceBasic band saw operation GeneralMaintenance Sears recommends the following accessoriesTrouble TroubleshootingWiring diagram Probable CauseRepair parts Always order by Part Number- Not by Key NumberLO €4 TO IJU Variable Speed Partnumber Partdescription Model Number Name of ItemInch Band Saw