Unpacking and checking contents

contents
POWER TOOL WARRANTY			2
SAFETY INSTRUCTIONS		FOR BAND SAW	2
GLOSSARY OF TERMS FOR WOODWORKING .....4
MOTOR SPECIFICATIONS		AND ELECTRICAL
REQUIREMENTS			5
UNPACKING AND CHECKING CONTENTS			6
ASSEMBLY
Mounting	Band Saw to Workbench		7
Installing	the Table		8
Installing	the Blade		9
Tensioning the Blade			10

Tracking the Blade	11
Adjusting the Blade Guides and
Back-Up Bearing	11
Final Table Assembly	12
Aligning the Table Square to the Blade	12
Getting to Know your Band Saw	14
BASIC BAND SAW OPERATION	16
MAINTENANCE	19
RECOMMENDED ACCESSORIES	19
TROUBLESHOOTING	20
REPAIR PARTS	21

TOOLS NEEDED

1.1.1.

1.1-,-

,, f.,.,-i.i,

,.................

COMBINATION SQUARE

#2 PHILLIPS SCREWDRIVER

MEDIUM SCREWDRIVER

WARNING: To avoid injury from unexpected starting or electrical shock, do not plug the saw in until all assembly and alignment steps are

complete. The power cord must remain

unplugged whenever you are working on the saw.

		-3
	I/2	INCH WRENCH
COMBINATION SQUARE MUST BE TRUE
DRAW-LIGHT		STRAIGHT	EDGE OF
LINE ON BOARD		BOARD 3/4" THICK
ALONG THIS EDGE	_.	THIS EDGE	MUST BE
		PERFECTLY	STRAIGHT

Model 113.244530 Band Saw is shipped complete in one carton.

Separate all parts from packing materials and check each item with illustration and "Table of Loose Parts".

Make cp.rtain all items are accounted for, before dis- carding any packing material.

WARNING: If any parts are missing, do not try to assemble the band saw, plug in the power cord, or turn the switch on until the missing parts are obtained and installed correctly.

SHOULD BE NO GAP OR OVERLAP HERE WHEN SQUARE IS FLIPPED OVER IN DO'rFED PosmoN