Supply Wires | Emerson CF945AB, CF945WB, CF945PW, CF945HTW specification

	NOTE: CEILING COVER,
	SUPPLY WIRES AND	OUTLET
	FAN WIRES OMITTED	OUTLET
	FAN WIRES OMITTED	BOX
	FOR CLARITY.	BOX
	FOR CLARITY.

	HANGER
	BRACKET
Figure 9	HANGER BALL/
	DOWNROD ASSEMBLY

If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.

!WARNING

To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. NOTE: If you are not sure if the outlet box is ground- ed, contact a licensed electrician for advice, as it must be grounded for safe operation.

12.Screw the two threaded studs (supplied) into the tapped holes in the hanger bracket (Figure 10).

13.Lift the ceiling cover up to the threaded studs and turn until studs protrude through the holes in the ceiling cover (Figure 11).

14.Secure the ceiling cover in place by sliding lockwash- ers over the threaded studs and installing the two knurled knobs (supplied) (Figure 11). Tighten the knurled knobs securely until the ceiling cover fits snugly against the ceiling.

CEILING COVER

THREADED STUD LOCKWASHERS (2)

KNURLED KNOB

Figure 11

10.Connect the green grounding lead from the hanger ball and the green grounding lead from the hanger bracket to the grounding conductor of supply (this may be a bare wire or wire with green colored insulation). Securely connect wires with wire connector supplied. (Figure 10).

11.Securely connect the fan motor white wire to the supply white (neutral) wire using wire connector supplied (Figure 10). Securely connect the fan motor black wire to the supply black (hot) wire using wire connector supplied (Figure 10). After connections have been made, turn leads upward and carefully push leads into the outlet box.

WHITE SUPPLY (NEUTRAL)

BLACK SUPPLY (HOT)

!WARNING

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

15.Mount blade flanges to fan blades using three 3/16-24 x 3/8” slotted washer head blade screws, three plastic washers (Figure 12).

3/16-24 X 3/8" WASHER HEAD BLADE SCREW (3)

PLASTIC WASHER (3)

BLACK FAN

WIRE

SUPPLY

GROUND WIRE

GREEN WIRE (GROUND) FROM HANGERBALL

GREEN WIRE (GROUND) FROM HANGER BRACKET

LISTED WIRE

CONNECTOR (3)

WHITE

FAN WIRE

HANGER

BRACKET

THREADED

STUD (2)

FAN BLADE

BLADE

FLANGE

Figure 12

Figure 10

!WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

NOTE: Take care not to scratch fan housing when installing blades.

NOTE: Remove and discard the four shipping spacers and screws from the motor hub.

CF945AB, CF945HTW, CF945PW, CF945WB specifications

The Emerson CF945HTW, CF945PW, CF945AB, and CF945WB are impressive ceiling fans that blend elegance with advanced technology, making them ideal for various settings, from modern homes to commercial spaces. These models stand out not only for their aesthetic appeal but also for their energy efficiency and reliable performance.

One of the main features of the CF945 series is the stylish design, which includes a range of finishes such as white, brushed nickel, antique brass, and walnut. This variety enables homeowners and decorators to seamlessly integrate the fans into their desired décor theme. Each model sports a sleek, contemporary profile with a five-blade configuration that enhances both airflow and visual balance.

The 52-inch blade span is specifically engineered for optimal air circulation in medium to large rooms. The CF945 fans operate quietly, thanks to a powerful and efficient motor that ensures a pleasant atmosphere without disruptive noise. With the versatility of three-speed settings, users can easily adjust airflow to suit their comfort level.

Another significant characteristic of these fans is their incorporation of the Energy Star rating, underscoring their energy efficiency and commitment to sustainability. The Emerson CF945 series is designed to minimize energy consumption while still maximizing performance, making it an eco-friendly cooling solution.

In terms of technologies, these fans are equipped with a dual mount system, allowing for both standard and angled mounting. This feature enhances installation flexibility, making it easier for homeowners to incorporate the fans in various ceiling heights. The fans also come with integrated light fixtures, available in multiple wattage options, providing ambient lighting alongside the cooling breeze.

Remote control functionality is another key feature, enabling homeowners to operate the fans effortlessly from across the room. This convenience allows for adjustments without the need to get up, enhancing the overall user experience. The easy-to-follow assembly instructions facilitate a quick installation process, making the Emerson CF945 series an excellent choice for those seeking a combination of style, effectiveness, and technology. In summary, the Emerson CF945HTW, CF945PW, CF945AB, and CF945WB ceiling fans deliver a perfect balance of design and functionality, suitable for enhancing any indoor space.

SUPPLY WIRES AND

CF945AB, CF945HTW, CF945PW, CF945WB specifications