Emerson CF945WB, CF945PW, CF945HTW, CF945AB owner manual Install Through Slots

Page 8

16.Rotate the motor hub until the flange screw holes are visible through the slots in the switch housing plate. Loosely attach one blade assembly to the motor hub using two 1/4-20 x 1/2” flange screws (Figure 13). Make sure the screws are NOT tightened. Repeat this procedure for the other four blade assemblies.

!WARNING

To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, balancing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

1/4-20 x 1/2" FLANGE SCREWS

 

(INSTALL THROUGH SLOTS

MOTOR

IN SWITCH HOUSING PLATE)

HUB

BLADE

FLANGE

SWITCH HOUSING

PLATE

Figure 13

17.The blade flanges have an interlocking feature that must be fully engaged before tightening the screws. Make sure all the flanges are properly engaged and then tighten the flange screws. If one of the flanges does not seat properly on the motor hub, loosen the adjacent flange screws, re-engage and reseat the flanges, then tighten the screws again.

18.Engage the motor connector with the connector in the remote control receiver (Figure 14). The two connectors are keyed and must be mated correctly before they can be engaged.

MOUNTING

SCREW (3)

SWITCH HOUSING

PLATE

MOTOR CONNECTOR

RECEIVER

CONNECTOR

19.Remove one of the mounting screws from the switch housing plate (Figure 14) and loosen the other two screws several turns.

NOTE: If you are installing an Emerson Light Fixture with your fan, refer to the Light Fixture Owner’s Manual and proceed as follows. Remove the center screw from the switch housing and install the light fitter in the threaded hole. Connect the blue wire from the light fitter to the receiver blue wire, and the white wire from the light fitter to the receiver white wire.

20.Remove the protective paper from the three adhesive blocks in the switch housing.Then posi- tion the remote control receiver securely onto the three adhesive blocks, making sure the antenna wire is uncoiled in the switch housing.

21.Engage the two slots in the switch housing with the two loosened mounting screws in the switch housing plate (Figure 15). Rotate the switch housing to the right, then tighten the two mount- ing screws and install the other mounting screw previously removed in Step 19.

MOUNTING

SCREW (3)

SWITCH

HOUSING

CENTER

SCREW

Figure 15

 

REMOTE CONTROL

 

Figure 14

RECEIVER

8

 

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Read and Save These Instructions Safety Instructions Unpacking Instructions Preset Memory Feature Installation of BatteryElectrical Requirements GeneralSetting Operating Frequency of Transmitter Receiver How to Put Your Ceiling Fan TogetherTOP Align with Outer Edge Housing Socket Supply Wires Install Through Slots Installation of the Decorative Support Rods Assembly ROD Support Assembly Setscrew DownrodInstallation Storage Bracket MaintenanceAccessories OperationTrouble Shooting Trouble Probable Cause Suggested RemedyRepair Parts Air Comfort Products

CF945AB, CF945HTW, CF945PW, CF945WB specifications

The Emerson CF945HTW, CF945PW, CF945AB, and CF945WB are impressive ceiling fans that blend elegance with advanced technology, making them ideal for various settings, from modern homes to commercial spaces. These models stand out not only for their aesthetic appeal but also for their energy efficiency and reliable performance.

One of the main features of the CF945 series is the stylish design, which includes a range of finishes such as white, brushed nickel, antique brass, and walnut. This variety enables homeowners and decorators to seamlessly integrate the fans into their desired décor theme. Each model sports a sleek, contemporary profile with a five-blade configuration that enhances both airflow and visual balance.

The 52-inch blade span is specifically engineered for optimal air circulation in medium to large rooms. The CF945 fans operate quietly, thanks to a powerful and efficient motor that ensures a pleasant atmosphere without disruptive noise. With the versatility of three-speed settings, users can easily adjust airflow to suit their comfort level.

Another significant characteristic of these fans is their incorporation of the Energy Star rating, underscoring their energy efficiency and commitment to sustainability. The Emerson CF945 series is designed to minimize energy consumption while still maximizing performance, making it an eco-friendly cooling solution.

In terms of technologies, these fans are equipped with a dual mount system, allowing for both standard and angled mounting. This feature enhances installation flexibility, making it easier for homeowners to incorporate the fans in various ceiling heights. The fans also come with integrated light fixtures, available in multiple wattage options, providing ambient lighting alongside the cooling breeze.

Remote control functionality is another key feature, enabling homeowners to operate the fans effortlessly from across the room. This convenience allows for adjustments without the need to get up, enhancing the overall user experience. The easy-to-follow assembly instructions facilitate a quick installation process, making the Emerson CF945 series an excellent choice for those seeking a combination of style, effectiveness, and technology. In summary, the Emerson CF945HTW, CF945PW, CF945AB, and CF945WB ceiling fans deliver a perfect balance of design and functionality, suitable for enhancing any indoor space.
Top Page Image Contents