Agilent Technologies 6813B, 6834B, 6814B, 6843A, 6811B, 6812B manual PHASeMODE, PHASeTRIGgered

Page 81

Language Dictionary - 3

PHASe:MODE

Phase Selectable

This command determines how the output phase is controlled during a triggered output transient. The choices are:

FIXed

The output phase is unaffected by a triggered output transient.

STEP

The output phase is programmed to the value set by PHASe:TRIGgered when a triggered

 

transient occurs.

PULSe

The output phase is changed to the value set by PHASe:TRIGgered for a duration

 

determined by the pulse commands.

LIST

The output phase is controlled by the phase list when a triggered transient occurs.

Command Syntax

Parameters

*RST Value

Examples

Query Syntax

Returned Parameters

Related Commands

[SOURce:]PHASe:MODE <mode> FIXed STEP PULSe LIST

FIXed

 

PHAS:MODE LIST

PHAS:MODE FIX

[SOURce:]PHASe:MODE?

<CRD>

PHAS PHAS:TRIG

PHASe:TRIGgered

Phase Selectable

This command sets the output phase when a triggered step or pulse transient occurs. The phase of the output voltage waveform is expressed relative to an internal reference. The phase angle is programmed in degrees. Positive phase angles are used to program the leading phase, and negative phase angles are used to program the lagging phase.

The PHASe command is not influenced by INSTrument:COUPle ALL. It applies only to the current output phase selected by INSTrument:NSELect.

Command Syntax

Parameters

*RST Value

Examples

Query Syntax

Returned Parameters

Related Commands

[SOURce:]PHASe:TRIGgered <NRf+>

–360 through +360 (degrees) MAXimum MINimum

triggered phase 1

= 0, triggered phase 2 = 240,

triggered phase 3

= 120

PHAS:TRIG 90

PHAS:TRIG MAX

[SOURce:]PHASe:TRIGgered?

<NR3>

PHAS:MODE PHASE

81

Image 81
Contents Programming Guide Printing History Safety SummaryTable of Contents System Considerations Language DictionaryMeasurement Subsystem Frequency Source Subsystem Function Source Subsystem Voltage 121 Programming ExamplesError Messages Scpi Command TreeScpi Conformance Information Elgar Model 9012 Compatibility167 IEC Mode Command SummaryIndex 181Earlier AC Source Models About this GuideDocumentation Summary Information about this Current modelExternal References Agilent VXIplug&play Power Products Instrument DriversScpi References Gpib ReferencesDownloading and Installing the Driver Accessing Online HelpSystem Requirements Page RS-232 Capabilities of the AC Source Gpib Capabilities of the AC SourceGpib Address RS-232 Data FormatRS-232 Programming Example RS-232 TroubleshootingIntroduction to Scpi Types of Scpi CommandsConventions Used in This Guide Types of Scpi MessagesScpi Command Tree Root LevelActive Header Path Moving Among Subsystems Effect of Optional HeadersUsing Queries Including Common CommandsCoupled Commands Structure of a Scpi MessageHeaders Combining Message UnitsMessage Unit Separator Query IndicatorRoot Specifier Message TerminatorNumerical Data Formats Scpi Data FormatsSuffixes and Multipliers Character DataAssigning the Gpib Address in Programs System ConsiderationsTypes of DOS Drivers Agilent 82335A DriverAgilent Basic Controllers Error HandlingPage Introduction Language DictionarySubsystem Subsystem CommandsSubsystem Syntax Calibration Subsystem CommandsCALibrateCURRentAC CalcurracCALibrateDATA CALibrateCURRentMEASureCALibrateIMPedance CALibrateLEVelCALibratePWMFREQuency CALibratePASSwordCALibratePWMRAMP CALibrateSAVECALibrateVOLTageAC CALibrateSTATeCALibrateVOLTageDC Calstat 1,6812 Calstat OFFCALibrateVOLTageOFFSet CALibrateVOLTagePROTectionCALibrateVOLTageRTIMe DISPlay Display Subsystem CommandsDISPlayMODE DISPlayTEXTInstrument Subsystem INSTrumentCOUPleInstcoup ALL INSTrumentNSELect INSTrumentSELect MEASureARRayCURRent? FETChARRayCURRent? Measurement Subsystem ArraysMEASureARRayCURRentHARMonic? FETChARRayCURRentHARMonic? MEASureARRayCURRentNEUTral? FETChARRayCURRentNEUTral? MEASureARRayVOLTage? FETChARRayVOLTage? MEASureARRayVOLTageHARMonic? FETChARRayVOLTageHARMonic? MEASureCURRent? FETChCURRent? Measurement Subsystem CurrentMEASureCURRentACDC? FETChCURRentACDC? MEASureCURRentAC? FETChCURRentAC?MEASureCURRentCREStfactor? FETChCURRentCREStfactor? MEASureCURRentHARMonic? FETChCURRentHARMonic?Parameters Examples MEASureCURRentHARMonicPHASe? FETChCURRentHARMonicPHASe? MEASureCURRentHARMonicTHD? FETChCURRentHARMonicTHD?MEASureCURRentNEUTral? FETChCURRentNEUTral? MEASureCURRentNEUTralAC? FETChCURRentNEUTralAC? MEASureCURRentNEUTralACDC? FETChCURRentNEUTralACDC?MEASureCURRentNEUTralHARMonic? FETChCURRentNEUTralHARMonic? MEASCURRNEUTHARMPHAS? MEASureFREQuency? FETChFREQuency? Measurement Subsystem FrequencyMeasurement Subsystem Power MEASurePOWer? FETChPOWer?MEASurePOWerAC? FETChPOWerAC? MEASurePOWerACAPParent? FETChPOWerACAPParent? MEASurePOWerACREACtive? FETChPOWerACREACtive?MEASurePOWerACPFACtor? FETChPOWerACPFACtor? MEASurePOWerACTOTal? FETChPOWerACTOTal? Measurement Subsystem Voltage MEASureVOLTage? FETChVOLTage?MEASureVOLTageAC? FETChVOLTageAC? MEASureVOLTageHARMonic? FETChVOLTageHARMonic? MEASureVOLTageACDC? FETChVOLTageACDC?MEASureVOLTageHARMonicTHD? FETChVOLTageHARMonicTHD? MEASureVOLTageHARMonicPHASe? FETChVOLTageHARMonicPHASe?Command Syntax Output SubsystemOUTPut OUTPutDFI OUTPutCOUPlingOUTPutDFISOURce Outpcoup DCOUTPutIMPedanceREAL OUTPutIMPedanceOUTPutIMPedanceREACtive OutpimprealOUTPutPONSTATe OUTPutPROTectionDELayOUTPutPROTectionCLEar Outpponstat RSTOUTPutTTLTrg OUTPutRIMODEOUTPutTTLTrgSOURce OutpttltSENSeCURRentACDCRANGe Sense SubsystemSENSeSWEepTINTerval SENSeSWEepOFFSetPOINtsSENSeWINDow Senswind KbesCURRent Source Subsystem CurrentCURRentPEAK CURRentPEAKMODECurrpeakmode FIX CURRentPROTectionSTATe CURRentPEAKTRIGgeredSource Subsystem Frequency FREQuencyFREQuencyMODE FREQuencySLEW FREQuencySLEWMODEFREQencySLEWTRIGgered FREQuencyTRIGgered FUNCtion Source Subsystem FunctionFUNCtionTRIGgered FUNCtionMODEFuncmode FIX Query Syntax SOURceFUNCtionSHAPeMODE?FUNCtionCSINusoid Funccsin Funccsin 10 THDQuery Syntax SOURceFUNCtionSHAPeCSINusoid? List Source Subsystem ListLISTCOUNt Related Commands ListcurrLISTCURRent LISTCURRentPOINts?LISTDWELl Related Commands ListdwelLISTDWELlPOINts? LISTFREQuencyLISTFREQuencyPOINts? LISTPHASeLISTFREQuencySLEW LISTFREQuencySLEWPOINts?Related Commands Listphas LISTPHASePOINts?Related Commands Listshap LISTSHAPeLISTTTLTrg ListstepLISTTTLTrgPOINts? Liststep OnceLISTVOLTagePOINts? LISTVOLTageLISTVOLTageSLEW Query Syntax SOURceLISTVOLTageLEVelPOINTs?LISTVOLTageOFFSet LISTVOLTageSLEWPOINts?LISTVOLTageOFFSetPOINts? LISTVOLTSLEWPOIN?LISTVOLTageOFFSetSLEW LISTVOLTageOFFSetSLEWPOINts?Query Syntax SOURceLISTVOLTageOFFSetSLEWPOINTs? Source Subsystem Phase PHASeSubsystem Syntax PHASeTRIGgered PHASeMODESource Subsystem Pulse PULSeCOUNtPULSeDCYCle Pulshold Dcyc PULSeHOLDPULSeWIDTh PULSePERiodSource Subsystem Voltage VOLTage VOLTageTRIGgeredVolt VOLTageOFFSet VOLTageMODEVOLTageOFFSetTRIGgered VOLTageOFFSetMODEVoltoffsmode FIX Query Syntax SOURceVOLTageOFFSetMODE?VOLTageOFFSetSLEWMODE VOLTageOFFSetSLEWVoltoffsslewmode Step Query Syntax SOURceVOLTageOFFSetSLEWMODE?VOLTagePROTection VOLTageOFFSetSLEWTRIGgeredVOLTagePROTectionSTATe VoltprotstatVOLTageRANGe Agilent 6814B, 6834B, 6843A Only Phase SelectableVOLTageSENSeDETector VOLTageALCDETector RTIMeVOLTageSENSeSOURce VOLTageALCSOURce VOLTageSLEWINTernal EXTernal VOLTageSLEWTRIGgered VOLTageSLEWMODEVoltslewmode Step Query Syntax SOURceVOLTageSLEWMODE?Status Subsystem STATusPRESetSTATusOPERationENABle Bit Configuration of Operation Status RegistersSTATusOPERation? STATusOPERationCONDition?Statoperntr STATusOPERationNTRansition STATusOPERationPTRansitionSTATusQUEStionable? Bit Configuration of Questionable Status RegistersSTATusQUEStionableCONDition? STATQUESEVEN?Query Syntax STATusQUEStionableENABle? STATusQUEStionableENABleNR1 register value Related Commands STATusQUEStionableNTRansition STATusQUEStionablePTRansitionSTATusQUEStionableINSTrumentISUMmary? Agilent 6834B Only Phase SelectableSTATusQUEStionableINSTrumentISUMmaryCONDition? STATusQUEStionableINSTrumentISUMmaryENABleSTATQUESINSTISUMCOND? Statquesinstisumenab101 StatquesinstisumntrSystem Commands SYSTemCONFigureSystconf Norm SYSTemERRor? SYSTemCONFigureNOUTputsSYSTemVERSion? SystconfnoutSYSTemLOCal SYSTemLANGuageSYSTemREMote SYSTemRWLockTrace Subsystem Command Syntax Parameters Examples Query SyntaxTRACe DataTRACeCATalog? DATACATalog? Command Syntax Parameters Examples Related CommandsTRACeDEFine DATADEFine TRACeDELete DATADELete107 Trigger SubsystemINITiateSEQuence INITiateNAME ABORtAbor INITSEQ1 Initname ACQINITiateCONTinuousSEQuence INITiateCONTinuousNAME TRIGgerDELayTRIGger 109TRIGgerSOURce IMMediate PHASeTRIGgerSEQuence2SOURce TRIGgerSYNChronizeSOURce Gpib device, *TRG, or GET Group Execute TriggerCommand Syntax Parameters RST Value Examples Query Syntax TRIGgerSEQuence2PHASe TRIGgerSYNCHronizePHASeTRIGgerSEQuence3 TRIGgerACQuire 111112 TRIGgerSEQuence3SOURce TRIGgerACQuireSOURceCommon Commands Common Commands Syntax113 Command Syntax *CLS Parameters None Bit Configuration of Standard Event Status Enable RegisterCLS ESEIDN? ESR?OPC Field InformationOPT? PSCRCL RST SAV Command Syntax SAV NRf Parameters ExampleSRE NR1 register binary valueSTB? Bit Configuration of Status Byte RegisterTRG TST?WAI Programming the Output Power-on InitializationEnabling the Output OUTPut onMaximum Voltage AC Voltage and FrequencyVoltage Ranges Agilent 6814B/6834B/6843A only 122Waveform Shapes Voltage and Frequency Slew RatesClipped Waveform Individual Phases Agilent 6834B onlyUser-Defined Waveform 124Programming the Output Phase Selecting a PhaseCurrent Limit 125DC Output Agilent 6811B/6812B/6813B only Peak Current Limit Agilent 6811B/6812B/6813B only126 VOLTageOFFSet 300VOLTage VOLTageLEVel, VOLTageOFFSet, and FUNCtionSHAPeVOLTageRANGe CURRent 127Programming Output Transients VOLTageRANGe CURRent 10VOLTageRANGe128 Model of Transient System 129 Transient System ModelStep and Pulse Transients Step Example130 List Transients Step131 Scpi Triggering Nomenclature Triggering Output ChangesLISTCOUNt Sequence Form AliasModel of Output Triggers 133 Output Trigger System ModelSelecting the Output Trigger Source Initiating the Output Trigger SystemABORt *RST *RCL TRIGgerSEQuence1SOURce BUS TRIGgerTRANsientSOURce BUSSpecifying a Trigger Delay Synchronizing Output Changes to a Reference Phase Angle135 Specifying a Dwell Time for Each List Point Generating Output TriggersSingle Triggers Continuous TriggersMaking Measurements Voltage and Current Measurements137 Simultaneous Output Phase Measurements Agilent 6834B only Power MeasurementsHarmonic Measurements 138Triggering Measurements Returning Voltage and Current Data From the Data BufferMeasurement Trigger System Model Selecting the Measurement Trigger Source Initiating the Measurement Trigger SystemINITiateIMMediateSEQuence3 or INITiateIMMediateNAME ACQuire 140Varying the Voltage and Current Sampling Rate Generating Measurement TriggersPre-event and Post-event Triggering 141Power-On Conditions Programming the Status RegistersOperation Status Group Status Byte and Service Request Enable Registers Bit SignalStandard Event Status Group 143Ac Source Status Model 144 Questionable Status Group Questionable Instrument Isummary Status Group145 PON Power On Bit Command ActionStandard Event Status Group 146Examples Status Byte RegisterMonitoring Both Phases of a Status Transition Programming the Trigger In and Trigger Out BNC ConnectorsTrigger In BNC Servicing Questionable Status EventsRemote Inhibit and Discrete Fault Indicator Trigger Out BNC149 Discrete Fault Indicator DFI Scpi Command CompletionRemote Inhibit RI 150151 Command Syntax152 Scpi Command Tree153 Scpi Command Tree aPage 155 Scpi Confirmed Commands156 Non Scpi CommandsError Number List Error #157 158 159 Page Main Board W1 Jumper Option Emulation Elgar Model 9012 Plug-in Programmer CompatibilitySyntax Compatibility 161Command Description Power-on StateStatus Model ByteFront Panel Operation ProtectionSystem Keys Function KeysEntry Keys E9012 Language Command SummaryTrigger Control key functions Device Clear Volts n Curl n Freq n RNG 0 Rngf 0 1165 Drop nPage 167 Using the SENSeCURRentACDCRANGe command168 Command SyntaxCALCulateINTegralTIME CALCulateSMOothing169 Vss delta Dmax limit CALCulateLIMitUPPerDc limit Dt tlimit Dt limit 170171 FORMat172 FORMatBORDerMEASureARRayCURRentHARMonic? 174 MEASureARRayVOLTageFLUCtuationsALL?175 Point Pst array176 MEASureARRayVOLTageFLUCtuationsFLICker?177 MEASureARRayVOLTageFLUCtuationsPST?178 SENSeCURRentPREFerence179 Slew Operation MEASureARRayCURRentPage 181 Index182 Index183 Scpi List Step 184QUEStionable INSTrument ISUMmary? 185Agilent Sales and Support Offices Manual Updates
Related manuals
Manual 91 pages 25.18 Kb Manual 20 pages 27.01 Kb Manual 3 pages 27.44 Kb Manual 79 pages 6.57 Kb

6812B, 6811B, 6813B, 6834B, 6843A specifications

Agilent Technologies, a leader in electronic test and measurement equipment, offers a range of powerful signal sources including the 6843A, 6834B, 6814B, 6813B, and 6811B models. These instruments are designed to support various applications in research, development, and manufacturing, providing precise signal generation capabilities.

The Agilent 6843A is a versatile signal generator known for its exceptional frequency range and modulation capabilities. It supports an extensive bandwidth, making it ideal for applications that require high-frequency signal generation. With its superior phase noise performance, the 6843A is an excellent choice for radar, wireless communications, and electronic warfare applications. The instrument features an intuitive user interface, allowing engineers to set parameters quickly and efficiently.

Next, the Agilent 6834B offers exceptional performance characteristics, including high output power and low distortion. This signal generator is particularly noted for its ability to produce complex modulation formats, making it suitable for testing advanced wireless communication systems. With a reliable and stable output, the 6834B ensures accurate and repeatable measurements, which is vital for thorough testing processes.

The 6814B model stands out for its dual-channel capabilities, allowing users to generate simultaneous signals for testing multiple components or systems. This feature significantly enhances testing efficiency and flexibility for engineers. With built-in arbitrary waveform functionality, users can create custom waveforms, making the 6814B suitable for a wide range of applications including device characterization and signal processing research.

For those seeking a more compact solution, the Agilent 6813B provides essential signal generation features without compromising on performance. It is designed for a variety of applications across telecommunications and consumer electronics, featuring a straightforward interface and robust performance metrics.

Lastly, the 6811B is an entry-level yet capable model that supports a broad spectrum of testing needs. Perfect for educational and laboratory environments, it provides essential functionalities required for effective signal generation and analysis.

Overall, Agilent Technologies' 6843A, 6834B, 6814B, 6813B, and 6811B signal generators offer an array of features and technologies that cater to various application needs. Their precision, reliability, and user-oriented designs position them as invaluable assets in any testing environment, ensuring engineers can carry out their work with confidence and accuracy.