Agilent Technologies Comprehensive Guide for the Agilent 6812B Air Conditioner User Manual
Page 110

3 - Language Dictionary

TRIGger:SOURce

This command selects the trigger source for the first sequence in generating a step, pulse, or list output as follows:

BUS

GPIB device, *TRG, or <GET> (Group Execute Trigger)

EXTernal

ac source’s backplane Trigger In BNC

IMMediate

trigger is generated as soon as the trigger system is initiated.

Command Syntax

TRIGger[:SEQuence1]:SOURce <CRD>

 

TRIGger[:TRANsient]:SOURce <CRD>

Parameters

BUS EXTernal IMMediate

 

*RST Value

BUS

 

 

Examples

TRIG:SOUR BUS

TRIG:TRAN:SOUR EXT

Query Syntax

TRIGger[:SEQuence1]:SOURce?

 

TRIGger[:TRANsient]:SOURce?

Returned Parameters

<CRD>

 

 

Related Commands

ABOR TRIG TRIG:DEL

TRIG:SYNC

 

TRIG:SYNC:PHAS

INIT

INIT:CONT *TRG WAI

TRIGger:SEQuence2:SOURce

TRIGger:SYNChronize:SOURce

These commands select the synchronizing trigger source in generating a step, pulse, or list output as follows:

IMMediate

PHASe

Starts the transient output immediately, unless a delay time other than 0 has been specified by TRIGger:DELay. In this case the transient output starts after the expiration of the delay time.

Starts the transient output at the reference phase set by TRIG:SYNC:PHAS.

Command Syntax

TRIGger:SEQuence2:SOURce <CRD>

 

TRIGger:SYNChronize:SOURce <CRD>

Parameters

IMMediate PHASe

 

*RST Value

IMMediate

 

Examples

TRIG:SYNC:SOUR IMM

TRIG:SEQ2:SOUR PHAS

Query Syntax

TRIGger:SEQuence2:SOURce?

 

TRIGger:SYNChronize:SOURce?

Returned Parameters

<CRD>

 

Related Commands

ABOR TRIG TRIG:DEL

TRIG:SOUR

 

TRIG:SYNC:PHAS INIT

INIT:CONT *TRG WAI

110

Page 109 Page 111
Image 110
Page 109 Page 111
Contents Programming Guide Safety Summary Printing HistoryTable of Contents Language Dictionary System ConsiderationsMeasurement Subsystem Frequency Source Subsystem Function Source Subsystem Voltage Programming Examples 121Scpi Conformance Information Scpi Command TreeError Messages Elgar Model 9012 CompatibilityIndex IEC Mode Command Summary167 181Documentation Summary About this GuideEarlier AC Source Models Information about this Current modelScpi References Agilent VXIplug&play Power Products Instrument DriversExternal References Gpib ReferencesSystem Requirements Downloading and Installing the DriverAccessing Online Help Page Gpib Address Gpib Capabilities of the AC SourceRS-232 Capabilities of the AC Source RS-232 Data FormatRS-232 Troubleshooting RS-232 Programming ExampleConventions Used in This Guide Types of Scpi CommandsIntroduction to Scpi Types of Scpi MessagesActive Header Path Scpi Command TreeRoot Level Effect of Optional Headers Moving Among SubsystemsCoupled Commands Including Common CommandsUsing Queries Structure of a Scpi MessageCombining Message Units HeadersRoot Specifier Query IndicatorMessage Unit Separator Message TerminatorSuffixes and Multipliers Scpi Data FormatsNumerical Data Formats Character DataTypes of DOS Drivers System ConsiderationsAssigning the Gpib Address in Programs Agilent 82335A DriverError Handling Agilent Basic ControllersPage Language Dictionary IntroductionSubsystem Commands SubsystemCALibrateCURRentAC Calibration Subsystem CommandsSubsystem Syntax CalcurracCALibrateIMPedance CALibrateCURRentMEASureCALibrateDATA CALibrateLEVelCALibratePWMRAMP CALibratePASSwordCALibratePWMFREQuency CALibrateSAVECALibrateVOLTageDC CALibrateSTATeCALibrateVOLTageAC Calstat 1,6812 Calstat OFFCALibrateVOLTageRTIMe CALibrateVOLTageOFFSetCALibrateVOLTagePROTection DISPlayMODE Display Subsystem CommandsDISPlay DISPlayTEXTInstcoup ALL Instrument SubsystemINSTrumentCOUPle INSTrumentNSELect INSTrumentSELect Measurement Subsystem Arrays MEASureARRayCURRent? FETChARRayCURRent?MEASureARRayCURRentHARMonic? FETChARRayCURRentHARMonic? MEASureARRayCURRentNEUTral? FETChARRayCURRentNEUTral? MEASureARRayVOLTage? FETChARRayVOLTage? MEASureARRayVOLTageHARMonic? FETChARRayVOLTageHARMonic? Measurement Subsystem Current MEASureCURRent? FETChCURRent?MEASureCURRentAC? FETChCURRentAC? MEASureCURRentACDC? FETChCURRentACDC?Parameters Examples MEASureCURRentCREStfactor? FETChCURRentCREStfactor?MEASureCURRentHARMonic? FETChCURRentHARMonic? MEASureCURRentNEUTral? FETChCURRentNEUTral? MEASureCURRentHARMonicPHASe? FETChCURRentHARMonicPHASe?MEASureCURRentHARMonicTHD? FETChCURRentHARMonicTHD? MEASureCURRentNEUTralHARMonic? FETChCURRentNEUTralHARMonic? MEASureCURRentNEUTralAC? FETChCURRentNEUTralAC?MEASureCURRentNEUTralACDC? FETChCURRentNEUTralACDC? MEASCURRNEUTHARMPHAS? Measurement Subsystem Frequency MEASureFREQuency? FETChFREQuency?MEASurePOWerAC? FETChPOWerAC? Measurement Subsystem PowerMEASurePOWer? FETChPOWer? MEASurePOWerACPFACtor? FETChPOWerACPFACtor? MEASurePOWerACAPParent? FETChPOWerACAPParent?MEASurePOWerACREACtive? FETChPOWerACREACtive? MEASurePOWerACTOTal? FETChPOWerACTOTal? MEASureVOLTageAC? FETChVOLTageAC? Measurement Subsystem VoltageMEASureVOLTage? FETChVOLTage? MEASureVOLTageACDC? FETChVOLTageACDC? MEASureVOLTageHARMonic? FETChVOLTageHARMonic?MEASureVOLTageHARMonicPHASe? FETChVOLTageHARMonicPHASe? MEASureVOLTageHARMonicTHD? FETChVOLTageHARMonicTHD?OUTPut Command SyntaxOutput Subsystem OUTPutDFISOURce OUTPutCOUPlingOUTPutDFI Outpcoup DCOUTPutIMPedanceREACtive OUTPutIMPedanceOUTPutIMPedanceREAL OutpimprealOUTPutPROTectionCLEar OUTPutPROTectionDELayOUTPutPONSTATe Outpponstat RSTOUTPutTTLTrgSOURce OUTPutRIMODEOUTPutTTLTrg OutpttltSense Subsystem SENSeCURRentACDCRANGeSENSeWINDow SENSeSWEepOFFSetPOINtsSENSeSWEepTINTerval Senswind KbesSource Subsystem Current CURRentCurrpeakmode FIX CURRentPEAKCURRentPEAKMODE CURRentPEAKTRIGgered CURRentPROTectionSTATeFREQuencyMODE Source Subsystem FrequencyFREQuency FREQencySLEWTRIGgered FREQuencySLEWFREQuencySLEWMODE FREQuencyTRIGgered Source Subsystem Function FUNCtionFuncmode FIX FUNCtionMODEFUNCtionTRIGgered Query Syntax SOURceFUNCtionSHAPeMODE?Query Syntax SOURceFUNCtionSHAPeCSINusoid? FUNCtionCSINusoidFunccsin Funccsin 10 THD Source Subsystem List ListLISTCURRent Related Commands ListcurrLISTCOUNt LISTCURRentPOINts?LISTDWELlPOINts? Related Commands ListdwelLISTDWELl LISTFREQuencyLISTFREQuencySLEW LISTPHASeLISTFREQuencyPOINts? LISTFREQuencySLEWPOINts?Related Commands Listshap LISTPHASePOINts?Related Commands Listphas LISTSHAPeLISTTTLTrgPOINts? ListstepLISTTTLTrg Liststep OnceLISTVOLTageSLEW LISTVOLTageLISTVOLTagePOINts? Query Syntax SOURceLISTVOLTageLEVelPOINTs?LISTVOLTageOFFSetPOINts? LISTVOLTageSLEWPOINts?LISTVOLTageOFFSet LISTVOLTSLEWPOIN?Query Syntax SOURceLISTVOLTageOFFSetSLEWPOINTs? LISTVOLTageOFFSetSLEWLISTVOLTageOFFSetSLEWPOINts? Subsystem Syntax Source Subsystem PhasePHASe PHASeMODE PHASeTRIGgeredPULSeDCYCle Source Subsystem PulsePULSeCOUNt PULSeHOLD Pulshold DcycPULSePERiod PULSeWIDThSource Subsystem Voltage Volt VOLTageVOLTageTRIGgered VOLTageMODE VOLTageOFFSetVoltoffsmode FIX VOLTageOFFSetMODEVOLTageOFFSetTRIGgered Query Syntax SOURceVOLTageOFFSetMODE?Voltoffsslewmode Step VOLTageOFFSetSLEWVOLTageOFFSetSLEWMODE Query Syntax SOURceVOLTageOFFSetSLEWMODE?VOLTagePROTectionSTATe VOLTageOFFSetSLEWTRIGgeredVOLTagePROTection VoltprotstatVOLTageSENSeDETector VOLTageALCDETector Agilent 6814B, 6834B, 6843A Only Phase SelectableVOLTageRANGe RTIMeINTernal EXTernal VOLTageSENSeSOURce VOLTageALCSOURceVOLTageSLEW Voltslewmode Step VOLTageSLEWMODEVOLTageSLEWTRIGgered Query Syntax SOURceVOLTageSLEWMODE?STATusPRESet Status SubsystemSTATusOPERation? Bit Configuration of Operation Status RegistersSTATusOPERationENABle STATusOPERationCONDition?STATusOPERationNTRansition STATusOPERationPTRansition StatoperntrSTATusQUEStionableCONDition? Bit Configuration of Questionable Status RegistersSTATusQUEStionable? STATQUESEVEN?NR1 register value Related Commands STATusQUEStionableENABleQuery Syntax STATusQUEStionableENABle? STATusQUEStionableNTRansition STATusQUEStionablePTRansitionAgilent 6834B Only Phase Selectable STATusQUEStionableINSTrumentISUMmary?STATQUESINSTISUMCOND? STATusQUEStionableINSTrumentISUMmaryENABleSTATusQUEStionableINSTrumentISUMmaryCONDition? StatquesinstisumenabStatquesinstisumntr 101Systconf Norm System CommandsSYSTemCONFigure SYSTemVERSion? SYSTemCONFigureNOUTputsSYSTemERRor? SystconfnoutSYSTemREMote SYSTemLANGuageSYSTemLOCal SYSTemRWLockTRACe Command Syntax Parameters Examples Query SyntaxTrace Subsystem DataTRACeDEFine DATADEFine Command Syntax Parameters Examples Related CommandsTRACeCATalog? DATACATalog? TRACeDELete DATADELeteTrigger Subsystem 107Abor ABORtINITiateSEQuence INITiateNAME INITSEQ1 Initname ACQTRIGger TRIGgerDELayINITiateCONTinuousSEQuence INITiateCONTinuousNAME 109TRIGgerSEQuence2SOURce TRIGgerSYNChronizeSOURce IMMediate PHASeTRIGgerSOURce Gpib device, *TRG, or GET Group Execute TriggerTRIGgerSEQuence3 TRIGgerACQuire TRIGgerSEQuence2PHASe TRIGgerSYNCHronizePHASeCommand Syntax Parameters RST Value Examples Query Syntax 111TRIGgerSEQuence3SOURce TRIGgerACQuireSOURce 112113 Common CommandsCommon Commands Syntax CLS Bit Configuration of Standard Event Status Enable RegisterCommand Syntax *CLS Parameters None ESEOPC ESR?IDN? Field InformationRCL OPT?PSC RST SRE Command Syntax SAV NRf Parameters ExampleSAV NR1 register binary valueTRG Bit Configuration of Status Byte RegisterSTB? TST?WAI Enabling the Output Power-on InitializationProgramming the Output OUTPut onVoltage Ranges Agilent 6814B/6834B/6843A only AC Voltage and FrequencyMaximum Voltage 122Voltage and Frequency Slew Rates Waveform ShapesUser-Defined Waveform Individual Phases Agilent 6834B onlyClipped Waveform 124Current Limit Selecting a PhaseProgramming the Output Phase 125126 DC Output Agilent 6811B/6812B/6813B onlyPeak Current Limit Agilent 6811B/6812B/6813B only VOLTageRANGe CURRent VOLTageLEVel, VOLTageOFFSet, and FUNCtionSHAPeVOLTageOFFSet 300VOLTage 127128 Programming Output TransientsVOLTageRANGe CURRent 10VOLTageRANGe Transient System Model Model of Transient System 129130 Step and Pulse TransientsStep Example 131 List TransientsStep LISTCOUNt Triggering Output ChangesScpi Triggering Nomenclature Sequence Form AliasOutput Trigger System Model Model of Output Triggers 133ABORt *RST *RCL Initiating the Output Trigger SystemSelecting the Output Trigger Source TRIGgerSEQuence1SOURce BUS TRIGgerTRANsientSOURce BUS135 Specifying a Trigger DelaySynchronizing Output Changes to a Reference Phase Angle Single Triggers Generating Output TriggersSpecifying a Dwell Time for Each List Point Continuous Triggers137 Making MeasurementsVoltage and Current Measurements Harmonic Measurements Power MeasurementsSimultaneous Output Phase Measurements Agilent 6834B only 138Measurement Trigger System Model Triggering MeasurementsReturning Voltage and Current Data From the Data Buffer INITiateIMMediateSEQuence3 or INITiateIMMediateNAME ACQuire Initiating the Measurement Trigger SystemSelecting the Measurement Trigger Source 140Pre-event and Post-event Triggering Generating Measurement TriggersVarying the Voltage and Current Sampling Rate 141Operation Status Group Power-On ConditionsProgramming the Status Registers Standard Event Status Group Bit SignalStatus Byte and Service Request Enable Registers 143Ac Source Status Model 144 145 Questionable Status GroupQuestionable Instrument Isummary Status Group Standard Event Status Group Command ActionPON Power On Bit 146Status Byte Register ExamplesTrigger In BNC Programming the Trigger In and Trigger Out BNC ConnectorsMonitoring Both Phases of a Status Transition Servicing Questionable Status Events149 Remote Inhibit and Discrete Fault IndicatorTrigger Out BNC Remote Inhibit RI Scpi Command CompletionDiscrete Fault Indicator DFI 150Command Syntax 151Scpi Command Tree 152Scpi Command Tree a 153Page Scpi Confirmed Commands 155Non Scpi Commands 156157 Error Number ListError # 158 159 Page Syntax Compatibility Elgar Model 9012 Plug-in Programmer CompatibilityMain Board W1 Jumper Option Emulation 161Status Model Power-on StateCommand Description ByteSystem Keys ProtectionFront Panel Operation Function KeysTrigger Control key functions E9012 Language Command SummaryEntry Keys Device Clear Volts n Curl n Freq n RNG 0 Rngf 0 1Drop n 165Page Using the SENSeCURRentACDCRANGe command 167Command Syntax 168169 CALCulateINTegralTIMECALCulateSMOothing Dc limit Dt tlimit Dt limit CALCulateLIMitUPPerVss delta Dmax limit 170FORMat 171FORMatBORDer 172MEASureARRayCURRentHARMonic? MEASureARRayVOLTageFLUCtuationsALL? 174Point Pst array 175MEASureARRayVOLTageFLUCtuationsFLICker? 176MEASureARRayVOLTageFLUCtuationsPST? 177SENSeCURRentPREFerence 178Slew Operation MEASureARRayCURRent 179Page Index 181Index 182183 184 Scpi List Step185 QUEStionable INSTrument ISUMmary?Agilent Sales and Support Offices Manual Updates
Related manuals
Manual 91 pages 25.18 Kb Manual 20 pages 27.01 Kb Manual 3 pages 27.44 Kb Manual 79 pages 6.57 Kb

6812B, 6811B, 6813B, 6834B, 6843A specifications

Agilent Technologies, a leader in electronic test and measurement equipment, offers a range of powerful signal sources including the 6843A, 6834B, 6814B, 6813B, and 6811B models. These instruments are designed to support various applications in research, development, and manufacturing, providing precise signal generation capabilities.

The Agilent 6843A is a versatile signal generator known for its exceptional frequency range and modulation capabilities. It supports an extensive bandwidth, making it ideal for applications that require high-frequency signal generation. With its superior phase noise performance, the 6843A is an excellent choice for radar, wireless communications, and electronic warfare applications. The instrument features an intuitive user interface, allowing engineers to set parameters quickly and efficiently.

Next, the Agilent 6834B offers exceptional performance characteristics, including high output power and low distortion. This signal generator is particularly noted for its ability to produce complex modulation formats, making it suitable for testing advanced wireless communication systems. With a reliable and stable output, the 6834B ensures accurate and repeatable measurements, which is vital for thorough testing processes.

The 6814B model stands out for its dual-channel capabilities, allowing users to generate simultaneous signals for testing multiple components or systems. This feature significantly enhances testing efficiency and flexibility for engineers. With built-in arbitrary waveform functionality, users can create custom waveforms, making the 6814B suitable for a wide range of applications including device characterization and signal processing research.

For those seeking a more compact solution, the Agilent 6813B provides essential signal generation features without compromising on performance. It is designed for a variety of applications across telecommunications and consumer electronics, featuring a straightforward interface and robust performance metrics.

Lastly, the 6811B is an entry-level yet capable model that supports a broad spectrum of testing needs. Perfect for educational and laboratory environments, it provides essential functionalities required for effective signal generation and analysis.

Overall, Agilent Technologies' 6843A, 6834B, 6814B, 6813B, and 6811B signal generators offer an array of features and technologies that cater to various application needs. Their precision, reliability, and user-oriented designs position them as invaluable assets in any testing environment, ensuring engineers can carry out their work with confidence and accuracy.
Top Page Image Contents