Sound Performance Lab 2053 manual Mounting

Page 5

Product Description

External synchronization: For synchronization with external sources, AES-data or Word-Clock signals can be used as sync sources. Alternatively the A/D converter can be synchronized to the data adjacent to the D/A converter. For internal/external synchroniza- tion please refer to the chapter "Operation", from page 11.

General Information

Mounting

The SPL converter module 2053 is exclusively offered as an option for certain SPL units. We especially advise electronically inexperienced users to contact an expert in case of queries.

In order to avoid static loads, please deactivate the GND-Lift switch on the back of the unit that is to be upgraded and touch its case.

Now pull the power cord out of the socket on the back of the unit operating the converter module. Please also remove all other cable connections.

Treat the converter carefully. Please make sure that you only touch the front panel or the sides of the cir- cuit board in order to avoid contact with parts on the circuit board. Never force any parts when connecting unit and converter module.

24/96 AD-DA Converter 2053

5

Image 5
Contents Manual 24/96 AD-DA Converter Manual Contents Product Description Security AdvicesMounting Steps 1 Steps 3 Analog XLR Outputs ConnectionsDigital I/Os OperationOperation AD Mode SwitchError LEDs External Synchronization Applications Channel ONE Using both convertersChannel ONE Using both channels of the converter Monitoring in 24Bit/96kHz Analog processing of a digital signalExample 2 Recording on a DAT recorder Example 1 Processing a samplers signalConverter SpecificationsBlock Diagram THD&N above input level THD&N @ 1 kHz FFT MeasurementsMeasurements Warranty Sound Performance Lab Sohlweg Niederkruechten Germany