Sound Performance Lab 2053 manual Connections, Analog XLR Outputs

Page 8
Wiring XLR Output
1 = GND, 2 = hot (+), 3 = cold (-)

Connections

1

2

3

The converter module provides analog, balanced XLR outputs (1), digital XLR I/Os (AES/EBU) (2) and digital S/P-DIF I/Os (3). In case of using the S/P-DIF output as a WC/AES SYNC input, the S/P-DIF output is no longer available. Important: please never use AES- and S/P- DIF digital inputs simultaneously!

Analog XLR Outputs

1 2

3

Balanced Unbalanced

1=GND 2=hot (+) 3=cold (-)

The unit operating the module has to be switched off

before connecting the converter via the XLR outputs with other units.

The illustration to the left demonstrates the correct wiring for unbalanced operation.

8

24/96 AD-DA Converter 2053

Image 8
Contents Manual 24/96 AD-DA Converter Manual Contents Security Advices Product DescriptionMounting Steps 1 Steps 3 Connections Analog XLR OutputsOperation Digital I/OsOperation AD Mode SwitchError LEDs External Synchronization Applications Channel ONE Using both convertersChannel ONE Using both channels of the converter Analog processing of a digital signal Monitoring in 24Bit/96kHzExample 1 Processing a samplers signal Example 2 Recording on a DAT recorderSpecifications ConverterBlock Diagram Measurements THD&N above input level THD&N @ 1 kHz FFTMeasurements Warranty Sound Performance Lab Sohlweg Niederkruechten Germany