Sound Performance Lab 2053 manual Manual

Page 2

Manual

24/96 AD-DA Converter 2053

Version 1.0 – 8/2000

The information in this document has been carefully verified and is assumed to be correct. However Sound Performance Lab (SPL) reserves the right to modify the product described in this manual at any time. Changes without notice. This document is the property of SPL and may not be copied or reproduced in any manner, in part or full without the authorization of SPL.

Limitations of Liability:

In no event will SPL be liable for any damages, inclu- ding loss of data, lost profits, cost of cover or other special, incidental, consequential or indirect damages arising from the use of the unit, however caused and on any theory of liability.This limitation will apply even if SPL or an authorized dealer has been adviced of the possibility of such damage.

Sound Performance Lab P.O. Box 12 27

D- 41368 Niederkruechten, Germany Phone +49 - 21 63 / 98 34-0

Fax +49 - 21 63 / 98 34-20

eMail: info@soundperformancelab.com

www.soundperformancelab.com

© 2000 SPL electronics GmbH. All Rights Reserved.

2

24/96 AD-DA Converter 2053

Image 2
Contents Manual 24/96 AD-DA Converter Manual Contents Security Advices Product DescriptionMounting Steps 1 Steps 3 Connections Analog XLR OutputsOperation Digital I/OsOperation AD Mode SwitchError LEDs External Synchronization Applications Channel ONE Using both convertersChannel ONE Using both channels of the converter Analog processing of a digital signal Monitoring in 24Bit/96kHzExample 1 Processing a samplers signal Example 2 Recording on a DAT recorderSpecifications ConverterBlock Diagram Measurements THD&N above input level THD&N @ 1 kHz FFTMeasurements Warranty Sound Performance Lab Sohlweg Niederkruechten Germany