Emerson CF943 owner manual Supply Ground Wire Green or Bare Receiver White Supply

BP7335 Palazzo 1/9/07 9:05 AM Page 12

f.Cap the receiver yellow wire using a wire connector (supplied).

g.Connect the green ground wires from the hanger bracket and the hanger ball to the supply ground wire (bare or green).

!WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

HANGER BRACKET

HANGER BRACKET GROUND WIRE (GREEN)

HANGER BALL GROUND WIRE (GREEN)

SUPPLY GROUND

WIRE (GREEN OR

BARE)

RECEIVER

WHITE SUPPLY

WIRE

Figure 20 CEILING COVER

OUTLET BOX

BLACK SUPPLY WIRE

BLACK FAN WIRE

BLACK/WHITE RECEIVER WIRE

BLUE FAN WIRE

BLUE RECEIVER

WIRE

OPEN

PORTION OF

RECEIVER

HERE

CAP THE YELLOW RECEIVER WIRE

USING A WIRE CONNECTOR

BLACK RECEIVER WIRE

WHITE RECEIVER WIRE

WHITE FAN WIRE

WIRE CONNECTOR

SW105 RECEIVER	TO
	110V
BLACK	SUPPLY
	SW113
SUPPLY
	FAN/LIGHT
WIRE
	WALL
WHITE	CONTROL
RECEIVER	WHITE
WIRE	SUPPLY
BLACK	WIRE
RECEIVER WIRE	BLUE RECEIVER
BLACK/WHITE	WIRE
RECEIVER WIRE	YELLOW
WHITE FAN WIRE	RECEIVER WIRE
	CAP THE
BLACK FAN WIRE
	YELLOW
	RECEIVER WIRE
	USING A WIRE
	CONNECTOR
	BLUE FAN WIRE
	DOWNROD

4. After connections have been made, separate the white and green wires from the black and blue wires.

5. Carefully turn the wires upward and insert them up through the open side of the hanger bracket and into the outlet box. Push the green and white wires into one side of the outlet box; push the black and blue wires into the other side of the outlet box.

6. Screw two 1-1/4” threaded studs (supplied in the loose parts bag) into the tapped holes in the hanger bracket (Figure 22).

Figure 21

12