Emerson CF943 owner manual Turn the fan motor assembly Upside down onto the styrofoam

BP7335 Palazzo 1/9/07 9:05 AM Page 8

	#10-32 x 5/16" PAN
FAN BLADE	HEAD BLADE SCREW
	(3 per blade)

#10 FLAT BLADE

WASHER

(3 per blade)

4. Securely connect the black wire connector of the light fitter assembly to the black motor wire connector. Securely connect the white wire of the light fitter assembly to the white motor wire (Figure 9).

BLADE	LIGHT FITTER	LIGHT FITTER
	BLACK WIRE	ASSEMBLY
FLANGE
		MOTOR HOUSING
		BLACK WIRE
		MOTOR HOUSING
		WHITE WIRE

Figure 6

NOTE: Take care not to scratch fan housing when installing blades.

LIGHT FITTER

WHITE WIRE

LIGHT KIT ADAPTER PLATE

2. Position the bottom half of the
styrofoam packaging on the floor
(Figure 7). Turn the fan motor assembly	Figure 9
upside down onto the styrofoam in	5. Position the light fitter assembly so that
preparation for mounting the fan blade
	the three holes align with the one hole
assemblies.
	and two keyhole slots in the light kit
FAN MOTOR ASSEMBLY	adapter plate (Figure 10).
(Flange Slots Facing Up)	6. Attach the light fitter assembly to the
	light kit adapter plate by securely
	installing the three #8-32 x 1/4” pan
	head screws (supplied in the loose
	parts bag) (Figure 10).

BOTTOM

HALF OF

STYROFOAM

Figure 7

3. Carefully slide one blade assembly into the motor housing assembly flange slot. Attach the blade assembly using two #10-32 x 5/16” oval head flange screws (Figure 8). Make sure the screws are securely tightened. Repeat this procedure for the other four blade assemblies.

!WARNING

To avoid possible fire or shock, make sure that the wires are not pinched between the light fitter assembly and the light kit adapter plate. Pinched wires will also cause the light fitter assembly to mount crooked on the light kit adapter plate.

#8-32 x 1/4" PAN HEAD SCREW (3)

LIGHT FITTER

ASSEMBLY

#10-32 x 5/16" OVAL HEAD FLANGE SCREW (2 per flange)

BLADE

ASSEMBLY

Figure 10

MOTOR HOUSING

ASSEMBLY FLANGE

SLOT

Figure 8

8