Subaru Robin Power Products EH64 warranty Operation, PRE-START Checks, Starting

Page 11

Operation

!WARNING EXHAUST GAS IS DEADLY!

Exhaust gases contain carbon monoxide, an odorless and color- less gas. Carbon monoxide is poisonous and can cause uncon- sciousness and death. Symptoms of carbon monoxide poisoning include:

•

Dizziness

•

Throbbing in Temples

•

Nausea

•

Muscular Twitching

•

Headache

•

Vomiting

•

Weakness and Sleepiness

• Inability to Think Coherently

any indications of fuel leakage. Do not operate engine until all leaks are repaired.

4.Check and tighten any loose bolts or nuts.

5.Check the oil and refill, if necessary. Do not overfill.

!CAUTION Starting the engine without oil will cause severe engine damage.

Always keep the engine oil level between the Full and Add marks on the dipstick.

6.Wear snug fitting clothes when operating the engine. Loose articles of clothing could get caught in the engine or drive train.

IF YOU OR ANYONE ELSE EXPERIENCE ANY OF THESE SYMP- TOMS, GET INTO THE FRESH AIR IMMEDIATELY. If symptoms persist, seek medical attention. Shut down the engine and do not operate it until it has been inspected and repaired.

Make certain the exhaust system is properly installed. Inspect it every time the engine is started and after every eight hours of continuous operation.

! WARNING

Moving parts can cause severe personal injury or death. Hot exhaust parts can cause severe burns. Stay clear of hot or moving parts. Make sure all protective shields and guards are secure in place before starting the equipment.

PRE-START CHECKS

Before the first start of the day and after every eight hours of operation perform the maintenance procedures in DAILY

(8 HOUR) MAINTENANCE in the Maintenance Section.

Keep a log of maintenance and the running hours. Perform any main- tenance that may be due. If the equipment has been in storage, return the engine to service as instructed under

RETURNING THE ENGINE TO SERVICE in this section.

1.Inspect exhaust system for loose joints, rusty, worn or damaged areas. Do not operate engine until all leaks are repaired.

2.Check the fuel level and refill if necessary. Open the fuel shut-off valve (if equipped).

3.Make sure fuel hoses and connections are tight. Check for

STARTING

1.Move the choke lever to the full-choke position. On equipment with a solenoid operated choke, push the switch to its choke position. In warm weather, however, or when the engine is warm, try starting without the choke or in the half-way position.

2.Turn the ignition switch to START and hold it there until the engine starts. Do not crank for more than 5 seconds at a time.

If the engine fails to start, set the switch to RUN and wait 10 seconds before the next attempt. See Troubleshooting if the engine does not start after several tries. Never turn the switch to START while the engine is running.

21

22

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Instructions for USE Model EH64 Welder Application Warranty Periods General Safety PrecautionsFuel Systems Keep the Unit and Surrounding Area CleanBatteries Protect Against Moving PartsModel Identification IntroductionAbout this Manual Description FeaturesFuel Tank InstallationLocating FuelStarting Batteries Engine OILRecommendations Filling and Change IntervalWiring Battery CablesFlex Coupling Belt DriveStarting OperationPRE-START Checks Operating in Dusty Conditions HOT and Cold Weather PrecautionsStopping Engine BREAK-INReturning the Engine to Service OUT-OF-SERVICE ProtectionDaily 8 Hour Maintenance Periodic MaintenanceChanging OIL and Filter Foam Filter AIR Cleaner MaintenanceAir Cleaner Element Replacement Outer CoverChecking Batteries Spark Plug Maintenance and ReplacementCarburetor Adjustments Troubleshooting Speed Control AdjustmentsEmission Control Information Important Information for California Engine UsersFederal Emissions Component Defect Warranty Limited Warranty HOW to File a Claim Spark Arrestor Screen How to remove the spark arrestorHigh Altitude Engine Operation Spark Arrestor OptionalIndustrial Products Division Finding the Robin Service Dealer to Meet Your NeedsRobin Distribution Method

EH64 specifications

The Subaru Robin Power Products EH64 is an advanced engine renowned for its reliability and efficiency, features that have made it a preferred choice in various applications, including industrial, agricultural, and commercial use. Designed to provide superior performance, the EH64 is equipped with a wide range of features that maximize its operational capabilities.

One of the standout characteristics of the EH64 is its lightweight design. Weighing in at just 64 pounds, this engine combines portability with powerful output, making it ideal for both mobile and stationary applications. The EH64 is powered by a high-performance 4-stroke, air-cooled engine that delivers a robust 6.4 horsepower. This output is sufficient for a variety of tasks, including powering equipment such as pumps, generators, and small machinery.

A key technology incorporated into the EH64 is Subaru’s advanced combustion technology. This engine employs a precision-engineered combustion chamber designed to enhance fuel efficiency while minimizing emissions. The result is a cleaner, more efficient burn that not only extends the engine's lifespan but also aligns with modern environmental standards. The engine operates smoothly across a range of speeds due to its excellent throttle response, providing consistency and control during operation.

Moreover, the EH64 features a dual-balanced crankshaft design that significantly reduces vibration. This design not only enhances comfort during operation but also increases the durability of the engine by minimizing wear and tear on internal components.

The Subaru Robin EH64 is also designed with user-friendliness in mind. It features an easy-start recoil mechanism, allowing for quick and reliable ignition, even in cold weather conditions. Furthermore, the engine includes a durable aluminum alloy cylinder, which provides increased heat dissipation and reduces the risk of overheating during extended use.

Maintenance is simplified with the EH64, thanks to its accessible layout, making routine checks and servicing straightforward. The engine's durable construction ensures that it can withstand the rigors of demanding environments, providing users with years of reliable service.

In summary, the Subaru Robin Power Products EH64 stands out in the market for its combination of lightweight design, powerful performance, advanced technologies, and user-friendly features. Whether for commercial usage or personal projects, the EH64 exemplifies quality and reliability, making it a preferred choice among engine options.
Top Page Image Contents