Subaru Robin Power Products EH64 warranty Batteries, Protect Against Moving Parts, Fuel Systems

Page 4

moving parts, etc.

•Used engine oils have been identified by some state and

federal agencies as causing cancer or reproductive toxicity. When checking or changing engine oil, take care not to ingest, breathe the fumes, or contact used oil.

•Do not work on this equipment when mentally or physically fatigued, or after consuming any alcohol or drug that makes the operation of equipment unsafe.

BATTERIES

•Before starting work on the engine, disconnect batteries to prevent inadvertent starting of the engine. Disconnect negative (-) cable first.

•DO NOT SMOKE while servicing batteries. Lead acid batteries give off a highly explosive hydrogen gas which can be ignited by flame, electrical arcing or by smoking.

•Verify battery polarity before connecting battery cables. Connect negative (-) cable last.

PROTECT AGAINST MOVING PARTS

•Do not wear loose clothing in the vicinity of moving parts, such as PTO shafts, flywheels, blowers, couplings, fans, belts, etc.

•Keep your hands away from moving parts

FUEL SYSTEMS

•DO NOT fill fuel tank while engine is running

•DO NOT smoke or use an open flame in the vicinity of the engine or fuel tank. Internal combustion engine fuels are highly flammable.

•Fuel line must be made of steel tubing which adequately secured, and free from leaks. Tubing which connects to the carburetor should be factory approved flexible line. Do not use copper tubing as the flexible lines as copper will harden and become brittle enough to break.

•Be sure all fuel supplies have a positive shutoff valve.

•Benzene and lead, found in some gasoline, have been identified by some state and federal agencies as causing cancer or reproductive toxicity. When checking, draining, or adding gasoline take care not to ingest, breathe fumes, or contact the gasoline.

EXHAUST SYSTEM

•Exhaust products of any internal combustion engine are toxic and can cause injury, or death it inhaled. When operating the engine in a confined area, make sure the ventilation system is operating properly.

•DO NOT use exhaust gases to heat a compartment.

•Make sure that your exhaust system is free of leaks. Make sure that exhaust manifolds are secure and are not warped by bolts unevenly torqued.

EXHAUST GAS IS DEADLY!

Exhaust gases contain carbon monoxide, a poisonous gas that can cause unconsciousness and death. It is an odorless and colorless gas formed during combustion of hydrocarbon fuels. Symptoms of carbon monoxide poisoning are:

•Dizziness

•Vomiting

•Headache

•Muscular Twitching

•Throbbing in Temples

•Weakness and Sleepiness

If you experience any of these symptoms, get out into fresh air imme- diately, shut down the unit and do not use it until it has been inspected. The best protection against carbon monoxide inhalation is proper installation and regular, frequent inspections of the complete exhaust system. If you notice a change in the sound or appearance of exhaust system, shut the unit down immediately and have it inspected and repaired at once by a competent mechanic.

KEEP THE UNIT AND SURROUNDING AREA CLEAN

•Make sure that oily rags are not left on or near the engine.

•Remove all unnecessary grease and oil from the unit. Accumulated grease and oil can cause overheating and subsequent engine damage and present a potential fire hazard.

7

8

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Instructions for USE Model EH64 Welder Application Warranty Periods Safety Precautions GeneralKeep the Unit and Surrounding Area Clean BatteriesProtect Against Moving Parts Fuel SystemsAbout this Manual IntroductionModel Identification Features DescriptionInstallation LocatingFuel Fuel TankEngine OIL RecommendationsFilling and Change Interval Starting BatteriesBattery Cables WiringBelt Drive Flex CouplingPRE-START Checks OperationStarting HOT and Cold Weather Precautions StoppingEngine BREAK-IN Operating in Dusty ConditionsOUT-OF-SERVICE Protection Returning the Engine to ServicePeriodic Maintenance Daily 8 Hour MaintenanceChanging OIL and Filter AIR Cleaner Maintenance Air Cleaner Element ReplacementOuter Cover Foam FilterCarburetor Adjustments Spark Plug Maintenance and ReplacementChecking Batteries Speed Control Adjustments TroubleshootingImportant Information for California Engine Users Emission Control InformationFederal Emissions Component Defect Warranty Limited Warranty HOW to File a Claim How to remove the spark arrestor High Altitude Engine OperationSpark Arrestor Optional Spark Arrestor ScreenRobin Distribution Method Finding the Robin Service Dealer to Meet Your NeedsIndustrial Products Division

EH64 specifications

The Subaru Robin Power Products EH64 is an advanced engine renowned for its reliability and efficiency, features that have made it a preferred choice in various applications, including industrial, agricultural, and commercial use. Designed to provide superior performance, the EH64 is equipped with a wide range of features that maximize its operational capabilities.

One of the standout characteristics of the EH64 is its lightweight design. Weighing in at just 64 pounds, this engine combines portability with powerful output, making it ideal for both mobile and stationary applications. The EH64 is powered by a high-performance 4-stroke, air-cooled engine that delivers a robust 6.4 horsepower. This output is sufficient for a variety of tasks, including powering equipment such as pumps, generators, and small machinery.

A key technology incorporated into the EH64 is Subaru’s advanced combustion technology. This engine employs a precision-engineered combustion chamber designed to enhance fuel efficiency while minimizing emissions. The result is a cleaner, more efficient burn that not only extends the engine's lifespan but also aligns with modern environmental standards. The engine operates smoothly across a range of speeds due to its excellent throttle response, providing consistency and control during operation.

Moreover, the EH64 features a dual-balanced crankshaft design that significantly reduces vibration. This design not only enhances comfort during operation but also increases the durability of the engine by minimizing wear and tear on internal components.

The Subaru Robin EH64 is also designed with user-friendliness in mind. It features an easy-start recoil mechanism, allowing for quick and reliable ignition, even in cold weather conditions. Furthermore, the engine includes a durable aluminum alloy cylinder, which provides increased heat dissipation and reduces the risk of overheating during extended use.

Maintenance is simplified with the EH64, thanks to its accessible layout, making routine checks and servicing straightforward. The engine's durable construction ensures that it can withstand the rigors of demanding environments, providing users with years of reliable service.

In summary, the Subaru Robin Power Products EH64 stands out in the market for its combination of lightweight design, powerful performance, advanced technologies, and user-friendly features. Whether for commercial usage or personal projects, the EH64 exemplifies quality and reliability, making it a preferred choice among engine options.
Top Page Image Contents