Subaru Robin Power Products EH64 warranty HOW to File a Claim

Page 22

(4)repairs performed outside of the authorized warranty service dealers

(5)use of parts which are not authorized by FUJI.

2.Add-on or modified parts

This warranty does not cover any part that malfunctions, fails or is damaged due to alter- ations by changing, adding to or removing parts from the engine.

3.Expenses incurred by processing warranty claims

FUJI, any authorized service dealer and warranty station shall not be liable for any loss of use of the engine, for any alternative usage, for any damage to goods, loss of time or inconvenience.

E.HOW TO FILE A CLAIM

All repairs qualifying under this Limited Warranty must be performed by a dealer who sold you the engine or warranty station authorized by ROBIN AMERICA. In the event that any emission- related part is found to be defective during the warranty period, you must notify the Robin America Inc. Customer Service Department at 1-630-350-8200 and you will be advised of the appropriate warranty service facilities where the warranty repair is to be performed.

F. WHERE TO OBTAIN WARRANTY SERVICE

It is recommended that warranty service be performed by the authorized dealer who sold you the engine, although warranty service will be performed by any authorized service dealers or warranty stations anywhere in the United States. When warranty repair is needed, the engine must be brought to an authorized service dealer or warranty station's place of business during normal business hours. In all cases, a reasonable time, not to exceed 30 days, must be allowed for the warranty repair to be completed after the engine is received by the authorized service dealer or warranty station.

G. MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS

Only warranted engine replacement parts approved by FUJI should be used in the perfor- mance of any warranty maintenance or repairs on emission-related parts. If other than autho- rized parts are used for maintenance, replacement or repair of components affecting emission control, you should assure yourself that such parts are warranted by their manufacturer to be equivalent to authorized parts in performance and durability. FUJI ,however, assumes no liabil- ity under this warranty with respect to parts other than authorized parts. The use of non-autho- rized replacement parts does not invalidate the warranty on other components unless the non- authorized parts cause damage to warranted parts.

H. PARTS COVERED UNDER THE CALIFORNIA EMISSIONS WARRANTY

(1)Fuel Metering System

(i)Carburetor and internal parts (and/or pressure regulator or fuel injection system).

(ii)Air/fuel ratio feedback and control system, if applicable.

(iii)Cold start enrichment system, if applicable.

(iv)Regulator assy (gaseous fuel, if applicable)

(2)Air Induction System

(i)Intake manifold, if applicable (ii)Air filter.

(3)Ignition System (i)Spark plugs.

(ii)Magneto or electronic ignition system. (iii)Spark advance/retard system, if applicable.

(4)Exhaust manifold, if applicable

(5)Miscellaneous Items Used in Above Systems (i)Electronic controls, if applicable (ii)Hoses, belts, connectors, and assemblies. (iii) Filter lock assy (gaseous fuel, if applicable)

I. MAINTENANCE STATEMENTS

It is your responsibility to have all scheduled inspection and maintenance services performed at the times recommended in the 2004 and later Owner's Manual and to retain proof that inspection and maintenance services are performed at the times when recommended. FUJI will not deny a warranty claim solely because you have no record of maintenance; however, FUJI may deny a warranty claim if your failure to perform required maintenance resulted in the failure of warranted part. The proof which you maintain should be given to each subsequent owner of the engine.

You are responsible for performing the scheduled maintenance described below based on the procedures specified in the 2004 and later Owner's Manual. The scheduled maintenance below is based on a normal engine operating schedule.

PROCEDURE

INTERVAL

1)

Change engine oil

: Initial 20 hours and every 100 hours afterward

2)

Clean air cleaner (element)

: Every 50 hours

3)

Replace air cleaner element

: Every 200 hours

4)

Clean and adjust spark plug and electrodes

: Every 200 hours

Note : More frequent maintenance may be necessary under dusty, dirty or severe conditions.

43

44

Image 22
Contents Instructions for USE Model EH64 Welder Application Warranty Periods Safety Precautions GeneralProtect Against Moving Parts Keep the Unit and Surrounding Area CleanBatteries Fuel SystemsAbout this Manual IntroductionModel Identification Features DescriptionFuel InstallationLocating Fuel TankFilling and Change Interval Engine OILRecommendations Starting BatteriesBattery Cables WiringBelt Drive Flex CouplingPRE-START Checks OperationStarting Engine BREAK-IN HOT and Cold Weather PrecautionsStopping Operating in Dusty ConditionsOUT-OF-SERVICE Protection Returning the Engine to ServicePeriodic Maintenance Daily 8 Hour MaintenanceChanging OIL and Filter Outer Cover AIR Cleaner MaintenanceAir Cleaner Element Replacement Foam FilterCarburetor Adjustments Spark Plug Maintenance and ReplacementChecking Batteries Speed Control Adjustments TroubleshootingImportant Information for California Engine Users Emission Control InformationFederal Emissions Component Defect Warranty Limited Warranty HOW to File a Claim Spark Arrestor Optional How to remove the spark arrestorHigh Altitude Engine Operation Spark Arrestor ScreenRobin Distribution Method Finding the Robin Service Dealer to Meet Your NeedsIndustrial Products Division

EH64 specifications

The Subaru Robin Power Products EH64 is an advanced engine renowned for its reliability and efficiency, features that have made it a preferred choice in various applications, including industrial, agricultural, and commercial use. Designed to provide superior performance, the EH64 is equipped with a wide range of features that maximize its operational capabilities.

One of the standout characteristics of the EH64 is its lightweight design. Weighing in at just 64 pounds, this engine combines portability with powerful output, making it ideal for both mobile and stationary applications. The EH64 is powered by a high-performance 4-stroke, air-cooled engine that delivers a robust 6.4 horsepower. This output is sufficient for a variety of tasks, including powering equipment such as pumps, generators, and small machinery.

A key technology incorporated into the EH64 is Subaru’s advanced combustion technology. This engine employs a precision-engineered combustion chamber designed to enhance fuel efficiency while minimizing emissions. The result is a cleaner, more efficient burn that not only extends the engine's lifespan but also aligns with modern environmental standards. The engine operates smoothly across a range of speeds due to its excellent throttle response, providing consistency and control during operation.

Moreover, the EH64 features a dual-balanced crankshaft design that significantly reduces vibration. This design not only enhances comfort during operation but also increases the durability of the engine by minimizing wear and tear on internal components.

The Subaru Robin EH64 is also designed with user-friendliness in mind. It features an easy-start recoil mechanism, allowing for quick and reliable ignition, even in cold weather conditions. Furthermore, the engine includes a durable aluminum alloy cylinder, which provides increased heat dissipation and reduces the risk of overheating during extended use.

Maintenance is simplified with the EH64, thanks to its accessible layout, making routine checks and servicing straightforward. The engine's durable construction ensures that it can withstand the rigors of demanding environments, providing users with years of reliable service.

In summary, the Subaru Robin Power Products EH64 stands out in the market for its combination of lightweight design, powerful performance, advanced technologies, and user-friendly features. Whether for commercial usage or personal projects, the EH64 exemplifies quality and reliability, making it a preferred choice among engine options.