Subaru Robin Power Products EH64 warranty AIR Cleaner Maintenance, Outer Cover, Foam Filter

Page 16

10 DO NOT FILL TO A LEVEL ABOVE THE FULL MARK ON THE DIPSTICK. Drain the excess oil if too much has been added.

!CAUTION Too much oil can cause high oil consumption, high operating temperatures and oil foaming. Too little oil can cause severe engine damage. Keep the oil level between the Full and Add marks on the dipstick.

11Reconnect the spark plug wires and battery.

12Start the engine and run it for a short time while checking for oil leaks around the drain plug and oil filter. Do not overtighten: tighten only as necessary to eliminate leaks.

Used oil is harmful to the environment. Pour the used oil into a sealed container and deliver it to the nearest recycling center.

AIR CLEANER MAINTENANCE

Refer to the Maintenance Table for the air cleaner assembly.

Outer Cover

To remove the air cleaner cover, rotate the wing nut counterclockwise and remove.

Foam Filter

Remove and wash the urethane foam in water and detergent. Squeeze the foam wrapper dry like a sponge. Rinse with clean water and allow it to dry. Coat the wrapper evenly with 14 mL (one tbsp.) of SAE 30 engine oil. Knead the oil into the wrapper and squeeze out the excess oil.

Note: Failure to adequately wring out excess oil from the wrapper may cause a drop in engine power due to restriction of inlet air.

Install the foam wrapper over the paper air cleaner element by stretch- ing it over the inner cover. Completely cover all exposed paper pleats. Replace the air cleaner assembly when it becomes torn or stretched.

Air Cleaner Element Replacement

To keep anything from entering the carburetor and engine while the air cleaner element is off, pull the choke knob to the full-choke posi- tion to close the choke plate in the carburetor. Remove the outer cover and wipe away loose dust and debris from the air cleaner assembly. Remove the air cleaner assembly. Wipe off dust and debris from the air cleaner base. Use forced air to blow off dust and debris from the paper element.

Reinstall the paper element on the engine. Replace the foam wrapper and outer cover. Secure with the wing nut.

Element Set

P/N 263-32610-A1

31

32

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Instructions for USE Model EH64 Welder Application Warranty Periods Safety Precautions GeneralKeep the Unit and Surrounding Area Clean BatteriesProtect Against Moving Parts Fuel SystemsAbout this Manual IntroductionModel Identification Features DescriptionInstallation LocatingFuel Fuel TankEngine OIL RecommendationsFilling and Change Interval Starting BatteriesBattery Cables WiringBelt Drive Flex CouplingPRE-START Checks OperationStarting HOT and Cold Weather Precautions StoppingEngine BREAK-IN Operating in Dusty ConditionsOUT-OF-SERVICE Protection Returning the Engine to ServicePeriodic Maintenance Daily 8 Hour MaintenanceChanging OIL and Filter AIR Cleaner Maintenance Air Cleaner Element ReplacementOuter Cover Foam FilterCarburetor Adjustments Spark Plug Maintenance and ReplacementChecking Batteries Speed Control Adjustments TroubleshootingImportant Information for California Engine Users Emission Control InformationFederal Emissions Component Defect Warranty Limited Warranty HOW to File a Claim How to remove the spark arrestor High Altitude Engine OperationSpark Arrestor Optional Spark Arrestor ScreenRobin Distribution Method Finding the Robin Service Dealer to Meet Your NeedsIndustrial Products Division

EH64 specifications

The Subaru Robin Power Products EH64 is an advanced engine renowned for its reliability and efficiency, features that have made it a preferred choice in various applications, including industrial, agricultural, and commercial use. Designed to provide superior performance, the EH64 is equipped with a wide range of features that maximize its operational capabilities.

One of the standout characteristics of the EH64 is its lightweight design. Weighing in at just 64 pounds, this engine combines portability with powerful output, making it ideal for both mobile and stationary applications. The EH64 is powered by a high-performance 4-stroke, air-cooled engine that delivers a robust 6.4 horsepower. This output is sufficient for a variety of tasks, including powering equipment such as pumps, generators, and small machinery.

A key technology incorporated into the EH64 is Subaru’s advanced combustion technology. This engine employs a precision-engineered combustion chamber designed to enhance fuel efficiency while minimizing emissions. The result is a cleaner, more efficient burn that not only extends the engine's lifespan but also aligns with modern environmental standards. The engine operates smoothly across a range of speeds due to its excellent throttle response, providing consistency and control during operation.

Moreover, the EH64 features a dual-balanced crankshaft design that significantly reduces vibration. This design not only enhances comfort during operation but also increases the durability of the engine by minimizing wear and tear on internal components.

The Subaru Robin EH64 is also designed with user-friendliness in mind. It features an easy-start recoil mechanism, allowing for quick and reliable ignition, even in cold weather conditions. Furthermore, the engine includes a durable aluminum alloy cylinder, which provides increased heat dissipation and reduces the risk of overheating during extended use.

Maintenance is simplified with the EH64, thanks to its accessible layout, making routine checks and servicing straightforward. The engine's durable construction ensures that it can withstand the rigors of demanding environments, providing users with years of reliable service.

In summary, the Subaru Robin Power Products EH64 stands out in the market for its combination of lightweight design, powerful performance, advanced technologies, and user-friendly features. Whether for commercial usage or personal projects, the EH64 exemplifies quality and reliability, making it a preferred choice among engine options.
Top Page Image Contents