Subaru Robin Power Products EH64 warranty Periodic Maintenance, Daily 8 Hour Maintenance

Periodic Maintenance

MAINTENANCE, REPLACEMENT, OR REPAIR OF THE EMISSION CONTROL DEVICES AND SYSTEMS MAY BE PERFORMED BY NON-ROAD ENGINE REPAIR ESTABLISHMENTS OR INDIVIDUALS.

Periodic maintenance is essential for top engine performance. See the Table below as a guide for normal periodic maintenance. Under hot or dusty operating conditions some maintenance operations should be performed more frequently, as indicated by footnotes in the table.

			FREQUENCY
	Daily or	Every	Every	Every	Every	Every
	Every 8	50	100	200	500	1,000
MAINTENANCE OPERATION	Hours	Hours	Hours	Hours	Hours	Hours
Clean Dust and Debris
from Engine	X
Check fuel leakage from
fuel system. Retighten
fasteners or replace parts
if needed.	X1
Inspect for Loose Hardware
and Retighten	X
Check Oil Level and Add to
Full Level	X
Change Engine Oil			X2,4
Check Battery Fluid Level		X5
Clean Spark Plugs		X
Clean Outer Element of
Air Cleaner		X
Clean Fuel Strainer				X
Replace Air Cleaner Assembly				X
Inspect, Clean and Re-Gap
Spark Plugs				X
Change Engine Oil Filter				X3,4
Clean Carburetor					X
Clean Cylinder Head					X
Adjust Engine Valve Clearance					X6
Replace Spark Plugs					X
Replace Fuel Lines and Filter						X

1. Check for oil, fuel and exhaust leaks, loose parts and unusual noises and vibrations.

2. Change oil and filter after the first 20 hours of operation as a part of engine break-in.

3. Perform more often when operating in dusty conditions.

4. Perform more often when operating in hot conditions.

5. See instructions for battery care provided by the equipment or battery manufacturer.

6. Must be performed by a qualified mechanic (equipment or Robin dealer).

Periodic Maintenance

Keep a log of maintenance performed and the run time hours. Keeping a record of procedures will help you keep scheduled maintenance and provide a basis for supporting warranty claims

Maintenance, replacement or repair of emission control devices and systems may be performed by any engine repair establishment or individual. However, warranty work must be done completed by an authorized Robin Subaru dealer or distributor.

DAILY (8 HOUR) MAINTENANCE

The operator should check the following before the first start of the day and after every eight hours of operation:

1Inspect fuel lines and fittings for leaks. Repair leaks immediately.

2Look and listen for exhaust system leaks while the engine is running. Look for cracks and severe rusting in the muffler and tailpipe. Have all leaks repaired before continuing to operate the equipment.

!WARNING Hot exhaust parts can cause severe burns.

Allow the engine time to cool before servicing the exhaust system.

3Check the engine for dirt and debris and clean the flywheel air inlet screen and cylinder cooling fins as necessary.

!CAUTION A clogged flywheel air inlet screen or dirty cooling

fins can cause overheating and engine damage. Keep the cooling fins and air inlet screen clean.

4Check the engine oil level The equipment must be parked on a level surface ad the engine stopped. To get an accurate reading, wait a minute or so to allow the oil to settle in the crankcase if the engine has been running.

27 28