5 Commissioning | LXM32 |
5.1Commissioning procedure
5.1.1DC bus connection LXM32 to LXM32
Commissioning steps:
▶Verify proper installation of the drives and the connections for the common DC bus, see chapter "4.3 Verifying installation", page 49.
▶Switch on the controller supply for all devices.
▶Set the parameters for the braking resistors, see chapter "5.2 LXM32: Setting the braking resistor parameters".
▶Commission the drives, see the descriptions in the manuals for the individual products.
MNA01M001EN, V1.01, 08.2014
52 | Common DC bus |