Husqvarna MC 18 9H, MC 18 13H manual To Maneuver the Saw

Page 14

7

To Maneuver the Saw

•Set the handle bar height to a comfortable position.

•Raise the Blade (2E) as high as possible so that the Blade (2E) will not strike pavement when

8

To Start Sawing

•Follow all of the instructions outlined above.

•Open the Water Valve (1A) FULL open. Check the water to verify full flow, then adjust for proper amount of water on the blade BEFORE you lower the Blade.

Test for adequate water supply [2-1/2 to 5 gal/min (10 to 20 lit./min)]. Low water flow will cause damage to diamond blades.

If water supply is interrupted, stop cutting immediately.

Screw Feed Version:

•Lower the blade into the cut by pulling up on the Depth Control Lock (1E) and slowly turning the Hand Wheel COUNTER-CLOCKWISE. When the desired depth of cut is reached, push Depth Control Lock down to lock it in the hand wheel.

•During cutting, DO NOT exert excessive side pressure on the Handle Bars to attempt to “STEER” the saw. Use only enough pressure to follow the previously marked line.

•If the saw should stall for any reason, raise the blade completely out of the cut before starting your power source again!

•When lowering the Blade (2E) into a partially made cut, the blade must be perfectly aligned within the cut before starting to saw again. DO NOT FORCE the Blade (2E) into the material by lowering the Blade too fast, or by propelling the saw too fast.

9

Stopping the Saw

•Screw Feed Version:

Raise the blade out of the cut by pulling up on the depth control lock and slowly turning the hand wheel clockwise. Raise the blade (2E) high enough out of the cut to clear the pavement when maneuvering the saw.

•Turn off the Water Valve (1A).

•Turn the Engine Throttle to the IDLE position.

•STOP the engine by turning the Engine Switch (1D) to the OFF position.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Husqvarna Construction Products Contents Symbol Definitions Definición De Simbolos Page Atencion Page MC 18 Specifications SAW Dimensions Inches mmDO’s and do NOT’s Do not 2C. not Used PRE Operation Checklist General Instructions AssemblyFeatures Check Before Starting Starting The Power Source Fitting The BladeTo Maneuver the Saw Maintenance Engine OILRepairs Service PartsGovernor Speed Nota Diagram 1 Frame & Axle Bill of Material Index Description QTY Diagram 2 Depth Control Screw Feed Diagram 2 Depth Control Screw Feed Diagram 3 Pointer & Belt Guard Diagram 3 Pointer & Belt Guard Diagram 4 Guards & Water Distribution Diagram 4 Guards & Water Distribution Diagram 5 Blade Guard Diagram 5 Blade Guard Diagram 6 Engine & Bladeshaft Diagram 6 Engine & Bladeshaft Diagram 7 Kit, Water Tank Page Dust Warning Husqvarna Construction Products N. a Corporate Office

MC 18 13H, MC 18 9H specifications

The Husqvarna MC 18 series, including the MC 18 9H and MC 18 13H models, represents a significant advance in the world of walk-behind and self-propelled mowers. These machines are designed to deliver exceptional performance, durability, and user comfort, making them ideal for both professional landscapers and avid garden enthusiasts.

The MC 18 9H features a powerful Honda engine, specifically engineered for reliability and efficiency. This model boasts a 9 horsepower rating, which provides ample power for various mowing conditions, from residential lawns to more challenging terrains. On the other hand, the MC 18 13H ups the ante with a 13 horsepower engine, allowing for even greater cutting efficiency and performance, making it suitable for larger areas and tougher grass types.

One of the main features of the MC 18 series is their innovative cutting technology. Both models come equipped with a robust cutting deck that ensures a clean and precise cut. The adjustable cutting heights can be set to various levels, allowing users to customize the mowing experience based on lawn type and user preference. Additionally, the side discharge and mulching capabilities provide versatility in lawn care, allowing users to choose how they want to handle grass clippings.

Technologically, Husqvarna has incorporated a range of features to enhance user experience. These models come with an ergonomic handle that reduces vibration and fatigue during extended use. The controls are conveniently placed, allowing for easy adjustments while on the move. The MC 18 series also offers a spacious grass catcher option, which minimizes the need for frequent emptying, thus improving efficiency during mowing sessions.

Durability is another hallmark of the Husqvarna MC 18 series. Built with high-quality materials, these mowers are designed to withstand the rigors of regular use. The robust structure and reliable components ensure a long lifespan, making them a wise investment for anyone looking to maintain their lawn.

In conclusion, the Husqvarna MC 18 9H and MC 18 13H are outstanding choices for those seeking efficient and durable lawn care solutions. With their powerful engines, innovative cutting technology, ergonomic design, and robust build quality, these mowers are well-equipped to tackle a variety of mowing tasks, making them a valuable addition to any homeowner or landscaper's toolkit.
Top Page Image Contents