Husqvarna MC 18 13H, MC 18 9H manual MC 18 Specifications, SAW Dimensions Inches mm

	MC 18 Specifications
Power Source	Gas
MC 18 Model	MC 18 9H	MC 18 13H
Horsepower	9 HP	13 HP
Screw Feed Model
ALL SAWS FEATURE:
Max. Blade Cap. in. (mm)	18 (450)
Max. Depth of Cut	4-5/8"-6-5/8" (117.5-168.3mm)
Blade Shaft RPM	2,600	2600
Weight Crated - lb. (Kg)	209 (95)	222 (101)
Uncrated - lb. (Kg)	182 (83)	195 (88)
Arbor Size	1" (25.4mm)
Blade Flange	4-1/2" dia. with drive pin
Blade Drive	3 V-belts (9 & 13 HP engine)
Blade Control	Spring assisted screw feed
Blade Coolant	Removable dual water spray tubes; water supply connector located on left side of saw; control
Axle Front	3/4" (19 mm) diameter; raises and lowers cutting head
Wheels Front	5" x 1-1/2" x 3/4" (102 x 38 x 19mm); solid rubber tires, cast iron hub, roller bearings, lube fitting
Rear	8" x 2" x 5/8" (203 x 51 x 15.9mm); ball bearings; semi-pneumatic tires
Chassis	One piece reinforced box base
POWER SOURCE:
Engine/Motor	Honda	Honda
	Gas Engine	Gas Engine
Specifications	GX270	GX390
Max. Horsepower	9 HP	13 HP
Displacement cu. in. (cc)	16.5 (270)	23.7 (389)
Bore - in. (mm)	3.0 (76)	3.5 (88)
Stroke - in. (mm)	2.3 (58)	2.5 (64)
Cylinders/Stroke	1/4	1/4
Fuel Capacity - gal. (l)	1.59 (6.0)	1.72 (6.5)
Oil Capacity - pt.(l)	2.3 (1.1)	2.3 (1.1)
Air Filter	Dry type	Dry type
	dual element	dual element
	w/pre cleaner	w/pre cleaner
Starter	Recoil	Recoil
Engine Coolant	Air	Air
Oil Sentry	Standard	Standard

SAW DIMENSIONS: Inches (mm)

Crated Dimensions: L-35" x H-30-1/2" x W-22" (889 x 775 x 559mm)

	Inches	Metric (mm)
A - Height (Max.) - In. (mm)	47-1/2	(1207)
B - Saw Length, Pointer Up	45-1/2	(1156)
C - Max. Saw Length, Pointer
Down & Handles Out	64-1/4	(1632)
E - Pointer Extension	18-3/4	(476)
F - Frame Width	16	(406)
G - Frame Length	22-1/2	(572)
H - Saw Width	22	(559)
I - Front Axle Length	10-1/4	(260)
J - Rear Wheel Track	19-1/2	(495)
K - Blade to Wall	2-3/8	(61)
L - Wheel Base Length	15	(381)

Specifications are subject to change without notice. 7