IBM DS3000 manual

Page 16

Select the logical drives you wish to be mapped to the host and click Finish.

If more than one logical drive is selected, the logical unit number will be assigned automatically. If only one logical drive is selected, you will also be prompted to assign it a logical unit number (see below).

After this process has been completed, click OK and you will be informed if the host-to-logical drive mapping was a success and you would be able to map another host-to-logical drive. For this example, select NO.

DS3000 Storage Manager Software Demo Guide

- 16 -

Image 16

Contents DS3000 Storage Manager Demo Guide Storage Manager Demo Guide RevisionOverview Disclaimer Getting Started AudienceBackground Information PrerequisitesLoading the Software Http//w3Exploring the DS3000 Storage Manager Demo Page Tab Bar Screen Views Page Putting Together an Effective Demo Initial Setup Tasks dialog box ScenariosLocate the Disk System Rename the Storage SubsystemSet a Storage Subsystem password Configure Host AccessConfiguration Storage Subsystem Automatic SimplePage Page Page Select Unconfigured Capacity and click Next Logical Drive CreationPage Page Page From the Configure tab, select Configure Hot Spares Automatic Hot Spare Drive ConfigurationScenario 3 I want to protect against a failed drive Page Scenario 4 How do I add capacity to an array? Expanding Drive Capacity Dynamic Array ExpansionPage DS3000 Storage Manager Premium License Features Storage Partitioning Page FlashCopy FlashCopy Logical DrivesPage Page Page VolumeCopy Page Page Advanced Features and Manual Functions Manual Hot Spare Configuration Page Manual Logical Drive Configuration From the Configure tab, select Create Logical DrivesPage Page Page Media Scan Settings Command Line Interface

Related manuals

Manual 38 pages 50.94 Kb

Manual 32 pages 46.59 Kb