IBM DS3000 manual

Page 19

You will then be offered the option of Automatic or Manual configuration. Select Manual and Next.

At the Create Logical Drives – Specify Capacity window, first select the RAID level desired. You will then see a list of array options based on the number and type of drives in the configuration. From this list, select the array that has the attributes desired and click Next.

DS3000 Storage Manager Software Demo Guide

- 19 -

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Storage Manager Demo Guide Revision DS3000 Storage Manager Demo GuideOverview Disclaimer Prerequisites Getting StartedAudience Background InformationHttp//w3 Loading the SoftwareExploring the DS3000 Storage Manager Demo Page Tab Bar Screen Views Page Putting Together an Effective Demo Scenarios Initial Setup Tasks dialog boxRename the Storage Subsystem Locate the Disk SystemConfigure Host Access Set a Storage Subsystem passwordAutomatic Simple Configuration Storage SubsystemPage Page Page Logical Drive Creation Select Unconfigured Capacity and click NextPage Page Page From the Configure tab, select Configure Hot Spares Automatic Hot Spare Drive ConfigurationScenario 3 I want to protect against a failed drive Page Expanding Drive Capacity Dynamic Array Expansion Scenario 4 How do I add capacity to an array?Page DS3000 Storage Manager Premium License Features Storage Partitioning Page FlashCopy Logical Drives FlashCopyPage Page Page VolumeCopy Page Page Advanced Features and Manual Functions Manual Hot Spare Configuration Page From the Configure tab, select Create Logical Drives Manual Logical Drive ConfigurationPage Page Page Media Scan Settings Command Line Interface
Related manuals
Manual 38 pages 50.94 Kb Manual 32 pages 46.59 Kb
Top Page Image Contents